Versions Compared

Old Version 10

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 11

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
bgColor#FDFEFE
titleBGColor#CACFD2
title3CX
Column
width25%

About 3CX

3CX Phone System for Windows is a software-based IP PBX that replaces a proprietary hardware PBX / PABX. 3CX’s IP PBX has been developed specifically for Microsoft Windows and is based on the SIP standard, making it easier to manage and allowing you to use any SIP phone (software or hardware).

Column
width75%

See below for a list with supported features when using the Gigaset IP devices behind an 3CX PBX system.

All tests were performed by the Gigaset pro support team.

 

See the 3CX website page which explains how to AutoProvision N510IP PRO when connected to the 3CX PBX

Feature                                          DE310 / DE410 IP PRO    DE700 / DE900 IP PRO        N510 IP PRO          N720 IP PRO Multi cell    
Software release:  02.00.0002.00.03pending 92
Basic CallYesYes-YesYes
Calling line (CLIP)YesYes-YesYes
Connected line (COLP)----
Anonymous call----
Do Not DisturbYesYes--
Message waitingYesYes-YesYes
Call list/historyYesYes-YesYes
Voice mail deposit/retrievalYesYes-YesYes
Call waitingYesYes-YesYes
Call Hold / ToggleYesYes--
Music on Hold---YesYes
Call forward (CFU)YesYes-YesYes
Call forward (CFNR)YesYes-YesYes
Call forward (CFB)YesYes-YesYes
Call Transfer attendedYesYes-YesYes
Call Transfer unattendedYesYes-YesYes
Call Transfer blindYesYes--
DTMF (RFC2833)YesYes-YesYes
Conference 3ptyYesYes--
BLF Busy / Idle indicationYesYes--
Call pick-up direct  ( *20* extension)YesYes-YesYes
Call pick-up group ( *20 )YesYes-YesYes
Call pick-up BLFYesYes--
Call completed elsewhere---YesYes
Broadcast callYesYes--
Auto provisioning--√-


Additional information:

FeatureCode

Park a call. While on a call, click on the Transfer button and dial *0 followed
by the parking slot. E.g. to park the call in parking slot 1, dial *01.

*0
Pick up a parked call. E.g. to pick up a call parked in slot 1, dial *11*1

Pick up a call which is dialling at another extension. For example to
pick up a call dialling on extension 106, dial *20*106, or just *20* for first ringing

*20*
Broadcast call. Dial *9 followed by the extension number. If the receiver’s phone
has set-up Call Manager "Auto-answer" option, the phone will pick up automatically.		*9

...