You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Introduction

With Quick Dial, you can assign a number to the function key. When you press the Function key, the number will be dialed.

 

From software 2.16.6 or higher we implemented additional functionality.

Function key web-interface config example:

 

FunctionDescription
A Quick Dial key always starts with a numberWhen the Quick Dial key is pressed, the number is dialed.
$wcWait Connect: Wait until SIP connect is received
$p5Pause: Wait for .. seconds. In this example 5 seconds
$dtmf1234DTMF: Send DTMF tone. In this example 1234
$huHang up: Hang up, send BYE

Example:

85163$p3$dtmf1$p15$hu

Dial 85163, wait for 3 seconds, send DTMF tone "1", wait for 15 seconds and hang-up

 

Maximum characters allowed is 254

Maximum duration for execution is 180 seconds.

  • No labels