Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Introduction

From software 2.29.0 or higher we have implemented a new feature for service purposes.

Block new calls

How to start Block new calls

In the web-interface go to SETTINGS - DECT manager - Administration - Block new calls

  • Select the DECT manager where you can to block new calls (One or more DECT managers)
  • Select the option Block new calls (Today the only option)
  • Select the start time to block new calls or select Immediately
  • Select how long you want to block new calls (Days / Hours / Minutes / Seconds)
  • Press Set 

On the handsets you will see the following message if the calls are blocked: Service temporarily blocked

In SIP when the handsets are called, the system will respond with: 480 temporary not available

How to end Block new calls

  • Wait until the duration time is passed
  • In the web-interface
    • Select the DECT manager
    • Select Block new calls
    • Select Immediately
    • Duration set to "0"
    • Press Set
  • Handsets will show the normal IDLE screen


...


  • No labels