This page describes how to install the Gigaset P710/P810(B)/P82X/P85X(B)W desktop phones behind the Yeastar P-series PBX.

Yeastar, update of Auto Provisioning Templates


  • Open the web-interface of the Yeastar system
  • Go to Auto Provisioning - Resource Repository
  • Click on Check for New Template
  • Select as Vendor Gigaset to see all Gigaset templates
  • Click on to download the new template or   to refresh


Yeastar, add Phone

  • Open the web-interface of the Yeastar system
  • Go to Auto Provisioning - Phones
  • Click on Add
    • Vendor: Gigaset
    • Model: GigasetP710 or other type
    • MAC Address: The MAC address of your device
    • Template: YSDP_GigasetP710 or other type
  • Select Extension: The Extension/user
  • Copy the Provisioning Link

Gigaset, Provisioning URL

Copy and Past the above provisioning URL in the Gigaset P-series desktop phone.

Please add to the URL: /{mac}.xml

This is not required if the URL is got via:

  • PnP (SIP multicast)
  • GRAPE (Will be implemented by Yeastar)


Gigaset, Start provisioning

Start provisioning to get the configuration, can be done via:

  1. Reboot of the device
  2. On the phone: Settings - 5 - 4 - OK

After the first provisioning, an additional reboot is required.


  • No labels