Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

How to set the Basestation name behind a 3rd-party PBX?

Problem
The Gigaset handsets are connected on a 3rd party PBX system with DECT (GAP).
Users always see just "Base 1" in the display, instead of having their real displayname.

Solution
You need a standard Gigaset basestation for the setup. As soon as you register the handset to a 2nd basestation the "Select Base"-option will appear in the registration menu. With the softkeys you can then also change the basestation-name.
  • Register the handset behind the PABX (on the display appear Base 1)
  • Register handset on your second base station (to use only for the procedure)
Go to: Menu --> Settings --> Registration --> Select Base
  • Your choice will be Base 1 (base where the handset is registered)
  • Here you will see the softkey to change the name of the base station
  • Do that and on the display will appear the name of the base that you have assigned
In this way you have not changed the name of the handset but the name of the basestation.

To deregister the handsets from the additional Gigaset basestation you can use the hardware reset for the basestation or the dedicated menu on the handset itself.
  • No labels