You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Introduction

Your device is factory configured as a DHCP server so that it can provide PCs on your LAN that have no IP configuration with all the information required for a connection.

Default IP address

 

Network settings

DescriptionDefault value
IP address of your gateway192.168.0.250
Netmask of your gateway255.255.255.0

Info

If you already run a DHCP server on your LAN, it is recommended that you configure the device on a separate PC that is not connected to your LAN. Connect this PC alone to your system so that you have your own network to do the configuration.

 

Once you have completed the configuration of your device, you can test the connection in your LAN.

Test the connection from any device in the local network to your device. In the Windows Start menu, click Run and enter ping followed by a space and then the IP address of your device (e.g. 192.168.0.250). A window appears with the response "Replay from ...".

  • No labels