Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Release Date:

July 2016

Version:

10.1 Revision 3

What is new?

  • Factory Reset via Web-UI (Maintenance --> Factory Reset
  • Highest priority for Emergency Calls (if needed an active conversation will be canceld)
  • Maxwell 10 as system phone (NO auto-provisioning)
  • Forced password change on first login
  • stabalized SIP connections (disconnects are recognized faster)

Enhancements.      

  • ...                                                                                       

Bugfixes

  • VoIP - No voice transmission
    When used in a team an analog or an ISDN telephone, an incoming call signalized  correctly, but on accepting the call the voice transmission brakes.
  • VoIP - Account not usable
    When using VoIP clients (eg. A smartphone with VoIP client or a VoIP phone) the VoIP account could be unusable due to a NAT-conflict .
      
  • VoIP - providers problems
    Specific provider profiles were not displayed correctly or could not be edited or deleted.
  • QoS - No classification of high-PRIORITY-packets
    The internal classification of high-priority packets has been disturbed by an active firewall.
  • QoS - Configuration incorrect
    When using the wizard the QoS configuration was incorrect.
  • SIP - Disconnected
    It may happen that a connection is terminated by call forwarding.
  •  SIP - Wrong format
    Under special conditions, it may happen that an incorrect phone number format has been used.
     

Known Issues

  • NO auto-provisioning of Maxwell 10
  • Maxwell Basic and Maxwell 3 are not recognized as system phones
  • NO auto-provisioning of Maxwell Basic and Maxwell 3

 

 

 

 

  • No labels