You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

3CX

About 3CX

3CX Phone System for Windows is a software-based IP PBX that replaces a proprietary hardware PBX / PABX. 3CX’s IP PBX has been developed specifically for Microsoft Windows and is based on the SIP standard, making it easier to manage and allowing you to use any SIP phone (software or hardware).

See below for a list with supported features when using the Gigaset IP devices behind an 3CX PBX system.

All tests were performed by the Gigaset pro support team onsite at 3CX headquarters with 3CX support.

See the 3CX website page which explains how to Auto-provisioning N510 IP PRO when connected to the 3CX PBX

 Feature                                              N510 IP PRO          N720 IP PRO Multi cell    Maxwell 3/B
Software release:  240105Expected to be released
in May 2017
Basic CallYesYes 
Calling line (CLIP)YesYes 
Connected line (COLP)-- 
Anonymous callPlatform FeaturePlatform Feature 
Do Not Disturb-- 
Message waitingYesYes 
Call list/historyYesYes 
Voice mail deposit/retrievalYesYes 
Call waitingYesYes 
Call Hold / ToggleYes- 
Music on HoldYesYes 
Call forward (CFU)Platform FeaturePlatform Feature 
Call forward (CFNR)Platform FeaturePlatform Feature 
Call forward (CFB)Platform FeaturePlatform Feature 
Call Transfer attendedYesYes 
Call Transfer unattendedYesYes 
Call Transfer blind-- 
DTMF (RFC2833)YesYes 
Conference 3ptyYes- 
BLF Busy / Idle indication-- 
Call pick-up direct  ( *20* extension)YesYes 
Call pick-up group ( *20 )YesYes 
Call pick-up BLF-- 
Call completed elsewhereYesYes 
Broadcast call-- 
UDP / TCPYes / YesYes / Yes 
Auto provisioningYesYes 
 URL via Plug and PlayNo, because is FXS/DECT DeviceNo, because is FXS/DECT Device 
 Number of SIP accounts via prov.6100 
 Web Language
  • English
  • German
  • French
  • Polish
Yes 
 Change device web-password-- 
 Time zonesYesYes 
 Tone Set SelectionYesYes 
 Codec priorityYesYes 
 HTTP/HTTPS provisioningYesYes 
 Firmware updateVia web-interface N510Via web-interface N720 
 Trigger provisioningManual (PBX limitation)Manual (PBX limitation) 


Additional information:

FeatureCode

Park a call. While on a call, click on the Transfer button and dial *0 followed
by the parking slot. E.g. to park the call in parking slot 1, dial *01.

*0
Pick up a parked call. E.g. to pick up a call parked in slot 1, dial *11*1

Pick up a call which is dialling at another extension. For example to
pick up a call dialling on extension 106, dial *20*106, or just *20* for first ringing

*20*
Broadcast call. Dial *9 followed by the extension number. If the receiver’s phone
has set-up Call Manager "Auto-answer" option, the phone will pick up automatically.		*9

 

 

  • No labels