N720 XML provisioning parameters

WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-IP address type 

Enable/disable to obtain address from a DHCP server.

IPv4 address in hexadecimal format.

Example: 192.168.2.2-> 0xC0A80202 192(C0)168(A8)2(02)2(02)

WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-IP address 

Static IP address

IPv4 address in hexadecimal format.

Example: 255.255.255.0-> 0xFFFFFF00 255(FF)255(FF)255(FF)0(00)

WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Subnet mask

Subnet mask

IPv4 address in hexadecimal format.

Example: 192.168.2.1-> 0xC0A80201 192(C0)168(A8)2(02)1(01)

WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Standard gateway 

Default Gateway

IPv4 address in hexadecimal format.

Example: 192.168.2.253-> 0xC0A802FD 192(C0)168(A8)2(02)253(FD)

WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Preferred DNS server

Preferred DNS server

IPv4 address in hexadecimal format.

Example: 192.168.2.1-> 0xC0A802FE 192(C0)168(A8)2(02)254(FE)

WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Alternate DNS server
Alternate DNS server

Max. 20 characters;

If this field is empty, the product name will be copied into this;

WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Device name in network 

Device Name in the Network

0 => No;

1 => Yes;

WebUI: Network and Connections-IP Configuration-HTTP Proxy-Enable proxy server
HTTP request to foreign subnets use a proxy;

WebUI: Network and Connections-IP Configuration-HTTP Proxy-Proxy server address 

HTTP proxy server address;

WebUI: Network and Connections-IP Configuration-HTTP Proxy-Proxy server port 

HTTP proxy server port;

0 => No;

1 => Yes;

WebUI: Network and Connections-IP Configuration-HTTP Proxy-VLAN Tagging-Use VLAN tagging 

VLAN Tagging enabled;

WebUI: Network and Connections-IP Configuration-HTTP Proxy-VLAN Tagging-VLAN identifier

WebUI: Network and Connections-IP Configuration-HTTP Proxy-VLAN Tagging-VLAN priority

VLAN Priority

0 => No;

1 => Yes;

WebUI: Network and Connections-Security-Server Authentication-Accept certificates

If it's set to 1 then SSL certificates are automatically accepted

WebUI: Network and Connections-Security-Server Authentication-HTTP digest username

Usage of non symbolic:

<S_PROV_USERNAME class="string" value="broadsoft-username"/>

Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_USERNAME

WebUI: Network and Connections-Security-Server Authentication-HTTP digest password

Usage of non symbolic:

<S_PROV_PASSWORD class="string" value="broadsoft-password"/>

Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_PASSWORD

0 => No;

1 => Yes;

WebUI: Network and Connections-Security-Remote Management-Allow access from other networks

Allow access to webinterface from other networks;

0 => No;
1 => Yes; (default)

0 => No;

1 => Yes;

0 => Always;

1 => Automatic;

2 => Never

0x00 => PRIVACY_NONE;

0x01 => PRIVACY_USER;

0x02 => PRIVACY_NET_HEADER;

0x04 => PRIVACY_NET_SESSION;

0x08 => PRIVACY_NET_USER;

0x10 => PRIVACY_NET_NONE;

0x20 => PRIVACY_NET_CRITICAL;

0x40 => PRIVACY_NET_ID;

0 => Account inactive (and not visible);

1 => Account activ;

Depending on the UI as index the account or device index is used;

For the directory-ID values see "directory-ids";0 means no directory selected;

Depending on the UI as index the account or device index is used;

For the directory-ID values see "directory-ids";0 means no directory selected;

Depending on the UI as index the account or device index is used;

For the directory-ID values see "directory-ids";0 means no directory selected;

Array with 5 values of:

0x00 => PCMU G.711 µ law,

0x01 => PCMA G.711 a law,

0x02 = G726,

0x03 => G729,

0x04 => G726 AAL2 ,

0x05=> G722,

0xff => no codec;

The order of the values is important for the preference;

0 => Disabled;

1 => Enabled and handset is switched to hands free mode;

2 => Enabled and handset is switched to handset mode;

0 => No;

1 => Yes;

Nibble coded; F = end; Max. 3 digits (nibbles);

Example: Code=123, please enter '0x12,0x3f'

0 => None (Off),

1 => For calls from call lists;

2 => For all calls;

0 => No;

1 => Yes; Used e.g. for a different incoming call display;

0 => No;

1 => Yes;

Only used if automatic negotiation = No;

Bitmask with bit definitions:

0x01 => audio;

0x02 => RFC 2833;

0x04 => SIP INFO;

0 => from the SIP URL;

1 => from the SIP contact header;

0 => No;

1 => Yes;

0 => No;

1 => Yes;

0 => No;

1 => Yes;

0 => No;

1 => Yes;

0 => No;

1 => Yes;

0 => No;

1 => Yes;

The order of the ID's is used as the order of displaying the directories in the UI;

For the directory-ID values see "directory-ids";

WebUI:

Enable automatic adjustment of System Time with Time Server;

WebUI:

Time server address;

WebUI:

Time zone number;

0 => No;

1 => Yes;

WebUI:

Automatically adjust clock to summer-time changes;

integer:

0=Albania; 1=Argentina; 2=Australia; 3=Austria

4=Bahrain; 5=Belarus; 6=Belgium; 7=Bolivia

8=Bosnia and Herzegovina; 9=Brazil; 10=Bulgaria

11=Canada; 12=Chile; 13=China; 14=Colombia

15=Costa Rica; 16=Croatia; 17=Cyprus

18=Czech Republic; 19=Denmark; 20=Ecuador

21=Egypt; 22=Estonia; 23=Finland; 24=France

25=Germany; 26=Greece; 27=Hong Kong

28=Hungary; 29=Iceland; 30=India; 31=Indonesia

82=Iran; 32=Ireland; 33=Israel; 34=Italy; 35=Japan

36=Jordan; 37=Korea, Republic of; 38=Kuwait

39=Latvia; 40=Lebanon; 41=Liechtenstein

42=Lithuania; 43=Luxembourg; 44=Macedonia

45=Malaysia; 46=Mexico; 81=Montenegro

47=Morocco; 79=Namibia; 48=Netherlands

49=New Zealand; 50=Norway; 51=Pakistan

80=Palestine; 52=Panama; 53=Paraguay

54=Peru; 55=Philippines; 56=Poland; 57=Portugal

58=Puerto=Rico; 59=Romania; 60=Russia

61=Saudi Arabia; 62=Serbia; 63=Singapore

64=Slovakia; 65=Slovenia; 66=South Africa

67=Spain; 68=Sweden; 69=Switzerland

70=Taiwan; 71=Thailand; 72=Turkey

73=United Arab Emirates; 74=United Kingdom

75=United States of America; 76=Uruguay

77=Venezuela; 78=Other Country; 255=undefined

WebUI:

Local country number;

WebUI:

International Prefix;

WebUI:

International Code Number (Country Code);

WebUI:

Local (national) prefix;

0 => No;

1 => for local and national calls;

2 => for local calls;

WebUI:

Using area codes;

0 => default tones;

1 => US;

2 => Swisscom;

3 => RSA;

4 => AUT;

5 => CZE;

6 => ESP;

7 => FRA;

8 => GBR;

9 => NLD;

10 => POL;

11 => RUS;

WebUI:

Tone scheme selection;

0x01 => US;

0x02 => GER;

0x04 => SPAIN;

0x05 => PORTUG;

0x07 => ITALY;

0x09 => FRENCH;

0x0a => NETHER;

0x0f => CZECH;

0x11 => POLISH;

0x16 => SLOVAKIAN;

0x17 => RUSSIAN;

0x18 => GREEK;

0x1b => SLOVENIAN;

0x1c => ROMANIAN;

WebUI:

ID of the Web UI language;

WebUI:

WEB UI password;

0 => No;

1 => Yes;

WebUI:

Activate signalling of base station state via LED;

0 => No;

1 => Yes;

Bitmask with one bit for each weekday where system check should run.

Bitmasks for the days:

0x01 => Monday,

0x02 => Tuesday,

0x04 => Wednesday,

0x08 => Thursday,

0x10 => Friday,

0x20 => Saturday,

0x40 => Sunday

Web UI: Settings - Management - System log

IP address of syslog server

Web UI: Settings - Management - System log

Syslog server port

0 => No;

1 => Yes;

Web UI: Settings - Management - System log

Enable / disable syslog server

1=> for firmware update

2=> for firmware downgrade to former version

3=> for firmware downgrade to delivery version

Should be used together with KindOfPlannedUpdate

Unix timestamp: 0x648 - Thu, 01 Jan 1970 00:10:48 GMT

http://www.onlineconversion.com/unix_time.htm

Direct link towards DECT Manager firmware file.

Example: <S_SPECIAL_DATA_SRV_IWU class="string" value='"http://192.168.178.101/device/firmware/server_einstein_iwu095.bin"'/>

Name of file should be "server_einstein_iwu_Softwareversion.bin"

Restart/Sync/After time is needed to start upgrade.

Direct link towards DECT Basestation firmware file.

Example: <S_SPECIAL_DATA_SRV_SAT class="string" value='"http://192.168.178.101/device/firmware/sat7109500000000.bin"'/>

Naming of file should be like in the above example.

Restart/Sync/After time is needed to start upgrade.

0=default setting;

5=Broadsoft

Usage of non symbolic:

<I_PHONE_SYSTEM class="integer" value="5"/>

symbolic NVM where custom parameter will be stored: BS_IP_Data.ucI_PHONE_SYSTEM

Usage of non symbolic:

<S_PROV_USERNAME class="string" value="broadsoft-username"/>

Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_USERNAME

Usage of non symbolic:

<S_PROV_PASSWORD class="string" value="broadsoft-password"/>

Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_PASSWORD

0=enabled (default);

1=disabled

Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.ucB_DISABLE_CVS_ON_HANDSET

For non symbolic usage - disable CVS on handset:

<I_PHONE_SYSTEM class="integer" value="5"/>

<Disable_Common_Voice_Services_on_Handset class="integer" value="1"/>

For symbolic usage - disable CVS on handset:

<SYMB_ITEM ID="BS_IP_Data.ucI_PHONE_SYSTEM" class="symb_item" value="5"/>

<SYMB_ITEM ID="BS_IP_Data.ucB_DISABLE_CVS_ON_HANDSET" class="symb_item" value="1"/>

0x40

0x41

Settings to change Anonymous Call behaviour

0x40 => privacy: id

0x41 => privacy: id + From: Anonymous

0x0000173E

0x0000373E

0 = disabled (default)

Session Timer

InitValue=0 //feature off
Proposals
=90 // this is the smallest value allowed by RFC
>>>>>>>>=300 // would be Gigaset recommendation for regular use of session-timer
=1800 // is used by most UA and services

Defines the Alert-Info header value of the info parameter which indicates that the call should be signaled with internal ringing pattern:
Alert-Info: ;info=alert-internal

Control switch = BS_CUSTOM.ucAkzVoipNotUsedNumberLength
Default value = 0xff. To change it it has to be provisioned.

0 -> feature is switched off by user
1 -> numbers with length 1 are treated as PBX internal numbers (min)
9 -> numbers with length 9 are treated as PBX internal numbers (max)
ff -> Configuration not visible in WEB UI