You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 31 Current »

Importnat information

Please NOTE that all the presented below parameters can be prepared in automatic way using
the Gigaset provisioning tool, under address: http://prov.gigaset.net

In order to get the Authentication details to the Gigaset provisioning tool, please follow this link.

For more detailed information of how it can be done, please read this short Short manual



Parameter-Namepossible ValuesTypeDefaultMapped with WebUiReboot MandatoryWhere to find / Description

B_... - boolean expressed as true/false.
value



I_... - integer value in range +/-(2^15 - 1)





S_... - string value, e.g. “Ala ma kota” (entered without quotation signs).


Y = Yes            N = No
Network & Connection





LAN settings





B_HTTP_PROXY_ACTIVATEfalse = off
true = on		Boolean
YesNHTTP Proxy -> Enable Proxy
S_HTTP_PROXY_ADDRmax. 64 characters from (0-9,a-z,A-Z,-,.)String
YesNHTTP Proxy -> Proxy  Server Address
I_HTTP_PROXY_PORT1~65535; default:80Integer
YesNHTTP Proxy -> Proxy  Server Port
I_HTTP_PORT1~65535Integer80YesNOwn HTTP Server Settings -> HTTP Port
I_HTTPS_PORT1~65535Integer443YesNOwn HTTP Server Settings -> HTTPS Port
I_HTTP_CONNECTION_TYPE0: HTTP
1: HTTPS
2: HTTP + HTTPS		Integer0YesNOwn HTTP Server Settings -> HTTP Connection Type
I_HTTP_LOGOUT1~30; default = 10 (mins)Integer10YesNOwn HTTP Server Settings -> Automatic Logout (min)
VLAN settings





I_VLAN_ACTIVATEfalse = off
true = on		Integer0Yes [Note: if 0 - "No", If 1 - "LAN Port Only"NLAN settings -> Activate VLAN
I_VLAN_ID 1~4094Integer7YesNLAN settings -> VLAN ID (1..4094)
NOTE: Availavle when Activate VLAN (LAN) is TRUE
I_VLAN_LAN_PRIORITY 0~7 Integer1YesNLAN settings -> VLAN Priority
NOTE: Availavle when Activate VLAN (LAN) is TRUE
I_VLAN_PC_ACTIVATEfalse = off
true = on		Integer0YesNLAN settings -> Activate VLAN
IMPORTANT NOTE: To enable VLAN on PC port, the VLAN functionality on LAN port must be enabled simultaneously. If VLAN on PC port is enabled but disabled on LAN port in profile, phone will ignore it and keep it disabled on PC port.
I_VLAN_PC_ID1~4094Integer1YesNLAN settings -> VLAN ID (1..4094)
IMPORTANT NOTE: To enable VLAN on PC port, the VLAN functionality on LAN port must be enabled simultaneously. If VLAN on PC port is enabled but disabled on LAN port in profile, phone will ignore it and keep it disabled on PC port.
I_VLAN_PC_PRIORITY0~7 Integer0YesNLAN settings -> Voice VLAN Priority
NOTE: Availavle when Activate VLAN (PC) is TRUE
Server and Phone Systems





I_PHONE_SYSTEM1: Gigaset T500/300
2: Broadsoft
3: Starface
4: Asterisk
5: Standard
6: Sipgate Team
7: Unify OSBiz
8. Digitalisierungsbox
9. elmeg 		Integer5Yes
Phone Systems -> Connected with Phone System (GC shall provide the possible options)
S_PBX_ENTITY_CFU(no default, will be set by PBX)String
Yes
Gigaset T500: Dialog Entity for PBX CFU
S_PBX_CFU_ACTIVATENOTE: The part <NUMBER> is unchangable in the whole string provided by provisioning server. When phone originates INVITE to activate this feature, the part <NUMBER> can be replaced by a real number (i.e. in Call Divert).String*21*
<NUMBER> #		Yes
Gigaset T500: dial code for activating CFU (call forwarding unconditional)
S_PBX_CFU_DEACTIVATE
String#21# Yes
Gigaset T500: dial code for deactivating CFU
S_PBX_ENTITY_CFNR(no default, will be set by PBX)String
Yes
Gigaset T500: Dialog Entity for PBX CFNR
S_PBX_CFNR_ACTIVATENOTE: see item "S_PBX_CFU_ACTIVATE"String *61*
<NUMBER>
#		Yes
Gigaset T500: dial code for activating CFNR (call forwarding on no reply)
S_PBX_CFNR_DEACTIVATE
String#61# Yes
Gigaset T500: dial code for deactivating CFNR
S_PBX_ENTITY_CFB(no default, will be set by PBX)String
Yes
Gigaset T500: Dialog Entity for PBX CFB
S_PBX_CFB_ACTIVATENOTE: see item "S_PBX_CFU_ACTIVATE"String*67*
<NUMBER>
# 		Yes
Gigaset T500: dial code for activating CFB (call forwarding on busy)
S_PBX_CFB_DEACTIVATE
String#67# Yes
Gigaset T500: dial code for deactivating CFB
S_PBX_ENTITY_CCBS(no default, will be set by PBX)String
Yes
Gigaset T500: Dialog Entity for PBX CCBS
S_PBX_CCBS_ACTIVATE
String*37#Yes
Gigaset T500: dial code for activating CCBS (completion of calls to busy subscriber)
S_PBX_CCBS_DEACTIVATE
String#37#Yes
Gigaset T500: dial code for deactivating CCBS
S_PBX_ENTITY_DND(no default, will be set by PBX)String
Yes
Gigaset T500: Dialog Entity for PBX DND
S_PBX_DND_ACTIVATE
String*26#Yes
Gigaset T500: dial code for activating DND (do not disturb)
S_PBX_DND_DEACTIVATE
String#26#Yes
Gigaset T500: dial code for deactivating DND
I_CM_AUTO_ANSWER0: No
1: via Hands-free
2: via Headset		Integer0Yes
Call manager -> Accept calls via Call Manager directly
I_CM_EXEC_OUT_CALL

0: deactivated (default)
1: via Headset
2: via Hands-free

Integer0Yes
Call manager -> Execute Outgoing Calls
I_CM_ACCEPT_IN_CALL0: No (default)
1: via Hands-free
2: via Headset		Integer0Yes
Call manager -> Accept Incoming Calls
S_BLF_LISTmaximum 64 charactersString
Yes
Server and Phone System -> BLF list IP address (URL)
S_UCI_SERVERServer URLString
Yes
(If phone systems selected as Celsius / Starface) Phone System -> Extended service platform -> Server addrss
S_UCI_LOGIN_IDUser nameString
Yes
(If phone systems selected as Celsius / Starface) Phone System -> Extended service platform -> User name
S_UCI_PASSWORDPasswordString
Yes
(If phone systems selected as Celsius / Starface) Phone System -> Extended service platform -> Passwords
Broadsoft





S_XSP_HOSTURL to Broadsoft XSI server. Format: http://<providerURL>String


Only available when Broadsoft is selected as PBX Telephony
S_XSP_USERBroadsoft XSI UsernameString


Only available when Broadsoft is selected as PBX Telephony
S_XSP_PWBroadsoft XSI Password String


Only available when Broadsoft is selected as PBX Telephony
S_CALLCENTER_LOGIN_IDCall Center User nameString


(If phone systems selected as Broadsoft) Phone System ->Call Center User name
S_ENHANCED_CALL_LOG 0:basic Call Log
1:enhanced Call Logs		String0 No No

The Call Detail Server enables service providers to offer Enhanced Call Logs. With this feature, users can view call logs beyond the 20 records of dialed, received, and issed calls that are available with BroadWorks Web Call Logs feature.


QoS Settings





I_SIP_DSC0~63Integer34Yes
VoIP Quality of Service (QoS) -> SIP ToS/Diffserv (0..63)
I_RTP_DSC0~63Integer46Yes
VoIP Quality of Service (QoS) -> RTP ToS/Diffserv (0..63)
I_RTP_DSC_VIDEO0~63Integer46Yes
VoIP Quality of Service (QoS) -> RTP ToS/Diffserv (0..63)
VoIP Settings(When getting the following settings, "Listen ports for VoIP connections -> Use random ports" will be set automatically to "NO")




B_RANDOM_PORTfalse = off
true = on		Boolean0

Listen ports for VoIP connections -> Use random ports
I_SIP_PORT1025~65535 (defaul 5060)
Example:
Use Random Ports is FALSE: one single value like "5060"		String5060

Listen ports for VoIP connections -> SIP Port
I_SIP_PORT_11025~65535 (default- 6000)
Example:
Use Random Ports is TRUE: values like "5080" to be a valid range; difference of 20 ports at least between I_RTP_PORT and I_RTP_PORT_1		String5060


I_RTP_PORT1025~65535 (default- 5004)
Example:
Use Random Ports is FALSE: one single value like "5004"		String49152

Listen ports for VoIP connections -> RTP Port
I_RTP_PORT_11025~65535 (default- 5024)
Example:
Use Random Ports is TRUE: values like "5024" to be a valid range; difference of 20 ports at least between I_RTP_PORT and I_RTP_PORT_1		String49152


B_ICEfalse = off
true = on		Boolean0

Listen ports for VoIP connections -> ICE Enabled
Security Settings





B_REMOTE_MANAGEMENTfalse = off
true = on		Boolean0YesNRemote Management -> Allow access from other networks to the WEB configurator
B_SRTPfalse = off
true = on		Boolean0Yes
Security Settings -> Secure RTP
B_ACCEPT_NON_SRTPfalse = off
true = on		Boolean1Yes
Security Settings -> Secure RTP
I_SIP_TRANSPORT0: UDP
1: TCP
2: TLS		Integer0Yes
Security Settings -> Choose network protocol
B_CERTIFICATE_AUTO_ACCEPTfalse = off (Default)
true = on		Boolean0Yes

Telephony





Connections






NOTE: "N" = 1 - 12




I_DEFAULT_ACCOUNT0: Connection 1
1: Connection 2
2: Connection 3
     ~~~~~~~
11: Connection 12		Integer0

Default Send Account
(it should not allow the Auto-P system to select the Mobile Connection as the default connection)
B_SIP_ACCOUNT_IS_ACTIVE_(N) / (N)=1~120: Inactive (default)
1: Active		Boolean0

Active
S_SIP_ACCOUNT_NAME_(N)max. 16 charactersString


Telephony -> Connections -> Edit -> Connection Name or Number
S_SIP_LOGIN_ID_(N)max. 32 charactersString


Telephony -> Connections -> Edit -> Authentication Name
S_SIP_PASSWORD_(N)max. 32 charactersString


Telephony -> Connections -> Edit -> Authentication Password
S_SIP_USER_ID_(N)max. 32 charactersString


Telephony -> Connections -> Edit -> Username
S_SIP_DISPLAYNAME_(N)max. 32 charactersString


Telephony -> Connections -> Edit -> Display Name
S_SIP_DOMAIN_(N)max. 64 characters from (0-9,a-z,A-Z,-,.)String


Telephony -> Connections -> Edit -> Domain
S_SIP_SERVER_(N)max. 64 characters from (0-9,a-z,A-Z,-,.)String


Telephony -> Connections -> Edit -> Proxy server address
I_SIP_SERVER_PORT_(N)1025~65535 (default:5060)Integer5060

Telephony -> Connections -> Edit -> Proxy server port
S_SIP_REGISTRAR_(N)max. 64 characters from (0-9,a-z,A-Z,-,.)String


Telephony -> Connections -> Edit -> Registration server
I_SIP_REGISTRAR_PORT_(N)1025~65535 (default:5060)Integer5060

Telephony -> Connections -> Edit -> Registration server port
I_RE_REGISTRATION_TIMER_(N)0~9999 (default: 120)Integer180

Telephony -> Connections -> Edit -> Registration refresh time sec
I_OUTBOUND_PROXY_MODE_(N)0: Never (default)
1: Always
2: Automatic		Integer0

Telephony -> Connections -> Edit -> Outbound proxy mode
S_OUTBOUND_PROXY_(N)max. 64 characters from (0-9,a-z,A-Z,-,.)String


Telephony -> Connections -> Edit -> Outbound server address
I_OUTBOUND_PROXY_PORT_(N)1025~65535 (default:5060)Integer


Telephony -> Connections -> dit -> Outbound proxy port
B_SIP_USE_STUN_(N)0: No (default)
1: Yes		Boolean0

Telephony -> Connections -> Edit -> STUN enabled
S_STUN_SERVER_(N)max. 64 characters from (0-9,a-z,A-Z,-,.)String


Telephony -> Connections -> Edit -> STUN server address
I_STUN_SERVER_PORT_(N)1025~65535 (default:3478)Integer3478

Telephony -> Connections -> Edit -> STUN server port
I_RE_STUN_TIMER_(N)0~9999 (default: 120)Integer240

Telephony -> Connections -> Edit -> STUN refresh time sec
I_NAT_REFRESH_TIME_(N)0~9999 (default: 120)Integer20

Telephony -> Connections -> Edit -> NAT refresh time sec
B_AUTOMATIC_DTMF_(N)false = off
true = on		Boolean0

Telephony -> Connections -> Edit -> Automatic negotiation of DTMF transmission
I_DTMF_TX_MODE_BITS_(N)1: Audio
2: RFC 2833
3: Audio + RFC2833
4: SIP Info
5: Audio + SIP Info
6: RFC2833 + SIP Info
7: Audio + RFC2833 + SIP Info		Integer5

Telephony -> Connections -> Edit -> Send settings of DTMF transmission
B_MISSED_ACCEPTED_COUNT_(N)false = off
true = on (Default)		Boolean1

Telephony -> Connections -> Edit -> Missed/accepted calls count
B_CALL_WAITING_(N)false = off
true = on		Boolean


Telephony -> Connections -> Edit -> Call Waiting
Connections - Edit (Audio Settings)






NOTE: For the first account, "_(N)" is not necessary for each parameter. For example, the ringer melody for the first account should be "I_RINGER_MELODIES" but not "I_RINGER_MELODIES_(1)".




S_RINGER_MELODIES_(N) / N= 0, 2~120: Individual (only available when N is equal to "0")
1~21: 21 selectable types as present in MMI                         default value: /system/jetty/webapps/webui/melodies/01.mp3		String"/system/jetty/webapps/webui/melodies/06_Gigaset.ogg"


I_RINGER_VOLUME0: Silence
1~10: 10 steps of volume for Hawking/Feynman
(1~5: 5 steps of volume for Newton/Kelvin)		Integer6

Settings -> Audio Settings -> Ringer Settings -> Volume
I_RINGER_MELODIES_EC_(N) / N= 2~121~21: 21 selectable types as present in Web GUIInteger6

Telephony -> Connections -> Edit -> Melody - External Call
I_RINGER_MELODIES_IC_(N) / N= 2~121~21: 21 selectable types as present in Web GUIInteger6

Telephony -> Connections -> Edit -> Melody - Internal Call
I_RINGER_MELODIES_GC_(N) / N= 2~121~21: 21 selectable types as present in Web GUIInteger6

Telephony -> Connections -> Edit -> Melody - Group Call
Audio





I_VOICE_QUALITY_(N)0: Optimised for high bandwidth
1: Optimised for low bandwidth
2: Own Codec preference		Integer0

Telephony -> Audio -> Voice Quality
S_SIP_PREFERRED_VOCODER_(N)

0: G711alaw
1: G711ulaw
2: G722
3: AMR_NB_OA
4: AMR_NB_BE
6: G729

Example: 0,1,2,3,4,6 for all codecs (separate by COMMA sign; no SPACE between each character; priority: left > right)
Note: This parameter is ignored if I_VOICE_QUALITY is 0 or 1; EMPTY means "don't change existing settings" if I_VOICE_QUALITY is 2.

String0,1,3

see WEB-GUI >= V22
set "own CODEC preference" as default!
I_RTP_PACKET_SIZE_(N)1: 10ms
2: 20ms
3: 30ms
**One setting only for all connections**
** 1 & 4~6 are reserved for other values that are not available in this hardware platform.		Integer2

Telephony -> Audio -> Packed time for RTP packages [ms]
B_SILENCE_SUPPRESSION0: No (default)
1: Yes
**One setting only for all connections**		Boolean0

Telephony -> Audio -> Silence Suppression
Video





S_SIP_PREFERRED_VIDEOCODER_(N)0 : H.264
1 : H.263
2 : H.263		String0

see WEB-GUI >= V22
set "own CODEC preference" as default!
S_VIDEO_RESOLUTION720p
VGA
QVGA		String720p


S_VIDEO_RESOLUTION_EXTERNAL720p
VGA
QVGA
1080p		String720p


Local Settings





I_AREA_COUNTRY0:Albania
1: Argentina
2: Australia
3: Austria
4: Bahrain
5: Belarus
6: Belgium
7: Bolivia
8: Bosnia and Herzegovina
9: Brazil
10: Bulgaria
11: Canada
12: Chile
13: China
14: Colombia
15: Costa Rica
16: Croatia
17: Cyprus
18: Czech Republic
19: Denmark
20: Ecuador
21: Egypt
22: Estonia
23: Finland
24: France
25: Germany
26: Greece
27: Hong Kong
28: Hungary
29: Iceland
30: India
31: Indonesia
32: Ireland
33: Israel
34: Italy
35: Japan
36: Jordan
37: Korea, Republic of
38: Kuwait
39: Latvia
40: Lebanon
41: Liechtenstein
42: Lithuania
43: Luxembourg
44: Macedonia
45: Malaysia
46: Mexico
47: Morocco
48: Netherlands
49: New Zealand
50: Norway
51: Pakistan
52: Panama
53: Paraguay
54: Peru
55: Philippines
56: Poland
57: Portugal
58: Puerto Rico
59: Romania
60: Russia
61: Saudi Arabia
62: Serbia
63: Singapore
64: Slovakia
65: Slovenia
66: South Africa
67: Spain
68: Sweden
69: Switzerland
70: Taiwan
71: Thailand
72: Turkey
73: United Arab Emirates
74: United Kingdom
75: United States of America
76: Uruguay
77: Venezuela
78: Vietnam
79: Namibia
80: Palestine
81: Montenegro
82: Other Country		Integer


Telephony -> Local Settings -> Area Codes -> Country
S_AREA_LOCAL_PREXmax. 4 phonedigits (0-9,*,#,R,P)String0

Telephony -> Local Settings -> Area Codes -> Local Prefix
S_AREA_LOCAL_AREAmax. 8 phonedigits (0-9,*,#,R,P)String


Telephony -> Local Settings -> Area Codes -> Local Area Code
I_TONE_SCHEME

1 Canada
3 Denmark
6 French
7 Germany
9 Netherlands
10 Polish
17 Spanish
18 Swedish
21 United Kingdom
23 Austria

Integer9

Telephony -> Local Settings -> Ring Tones -> Tone Scheme
Dialing Plans





S_DIAL_NUMBER_(N)N=1~30String


Telephony -> Dialling Plans -> Phone Number
B_DIAL_AREA_(N)false = off
true = on
N=0~N; N is not defined yet		Boolean0

Telephony -> Dialling Plans -> Use Area Codes
I_DIAL_CONNECTION_(N)0: Connection 1
1: Connection 2
2: Connection 3
     ~~~~~~~
11: Connection 12		Integer


Telephony -> Dialling Plans -> Connection
S_DIAL_COMMENT_(N)
String


Telephony -> Dialling Plans -> Comment
B_DIAL_ACTIVE_(N)false = inactive
true = active		Boolean0

Telephony -> Dialling Plans -> Active
S_ACCESS_CODEmax. 4 digits (0, 1~9; numeric only)String


Telephony -> Dialling Plan -> Access Code
I_USE_ACCESS_CODE0: None (default)
1: Directory & Call Lists
2: All
Allows 0~63; constructed by the 6 specified numbers of the 6 options.

32: outgoing calls list dialing
16: incoming calls list dialing
8: user defined net directory dialing
4: local directory dialing
2: public net directory dialing
1: manual dialing

E.g. "outgoing calls list dialing + user defined net directory dialing + local directory dialing" = 32+8+4 = 44; 0 means no option is selected		Integer0

Telephony -> Dialling Plan -> Access Code
Call Divert





S_CF_NUMBER_(N)_(N)max. 63 charactersString


Telephony -> Call Divert -> Phone Number
B_CF_ACTIVE_(N)_(N)false = off (Default)
true = on		Boolean0

Telephony -> Call Divert -> CheckBox
I_CF_NOANSWER_TIMEOUT_(N)1~600; default = 15 sec
15









Do Not Disturb





B_DND_LIST_ACTIVATEfalse = off (Default)
true = on		Boolean0

Telephony -> Do Not Disturb -> Activate DND List
B_ANON_CALLfalse = off (Default)
true = on		Boolean0

Telephony -> Do Not Disturb -> Block anonymous caller
S_DND_LIST
String


Telephony -> Do Not Disturb -> DND Name+Number
Call Live Recording





I_CALL_RECORD0: at USB Stick
1: at Server
2: at Phone		Integer2

Call Live Recording -> Call Record







Voice Mail ServicesNote: Not available if phone system is Gigaset T500/T300.




S_VOIP_NET_AM_NUMBER_(N) / (N)=1~12max. 32 phonedigits (0-9,*,#,R,P)
NOTE: The Voice Mail account must not be empty if it is enabled (i.e. B_VOIP_NET_AM_ENABLED_(N) = 1: Active).		String


Mailbox Number
B_VOIP_NET_AM_ENABLED_(N)0: Inactive
1: Active		Boolean0

Active







Services





Door Interphone






N = 1 - 10




S_DOOR_NAME_(N)max. 32 charactersString


Services -> Door Interphone -> Name
S_DOOR_ID_(N)max. 32 charactersString


Services -> Door Interphone -> SIP ID
S_DOOR_CODE_(N)max. 16 charactersString


Services -> Door Interphone -> DTMF Code
S_DOOR_URL_(N)max. No Limit characters;
Note: Must be started with "http://" and is valid URL		String


Services -> Door Interphone -> Camera (URL)
I_DOOR_RATE_(N)200~99999; default = 500 msInteger50

Services -> Door Interphone -> Reload Rate







Net-Directories





LDAP based Net-Directory





S_LDAP_NAMEmax. 16 charactersStringCorporate Directory

Services -> LDAP -> Name of Directory
I_LDAP_MAX_HITS1~250; (default: 50)Integer50

Services -> LDAP -> Max. Hits
B_LDAP_CALL_LOOKUPfalse = off (Default)
true = on		Boolean0

Services -> LDAP -> LDAP lookup for incomingcalls
S_LDAP_IPmax. 64 characters; Must be valid URLString


Services -> LDAP -> Server Address
I_LDAP_PORT1~65535Integer


Services -> LDAP -> Server Port
S_LDAP_SEARCH_BASEmax. 64 charactersString


Services -> LDAP -> LDAP Search Base
S_LDAP_AUTH_NAMEmax. 64 charactersString


Services -> LDAP -> Username
S_LDAP_AUTH_PASSWORDmax. 64 charactersString


Services -> LDAP -> Password
S_LDAP_NAME_FILTERmax. 64 charactersString


Services -> LDAP -> LDAP Name Filter
S_LDAP_NUM_FILTERmax. 64 charactersString


Services -> LDAP -> LDAP Number Filter
B_LDAP_ENABLE_PHONEBOOK0: Disable
1: Enable  (default)		Boolean



S_LDAP_ATTRIB_FNmax. 64 characters; default = givenNameStringgivenName

Services -> LDAP -> First Name
S_LDAP_ATTRIB_SNmax. 64 characters; default = snStringsn

Services -> LDAP -> Surname
S_LDAP_ATTRIB_HOMEmax. 64 characters; default = homePhoneStringhomePhone

Services -> LDAP -> Phone (Home)
S_LDAP_ATTRIB_WORKmax. 64 characters; default = telephoneNumberStringtelephoneNumber

Services -> LDAP -> Phone (Work)
S_LDAP_ATTRIB_MOBILEmax. 64 characters; default = mobileStringmobile

Services -> LDAP -> Phone (Mobile)
S_LDAP_ATTRIB_EMAILmax. 64 characters; default = mailStringmail

Services -> LDAP -> Email
S_LDAP_ATTRIB_FAXmax. 64 characters; default = facsimileTelephoneNumberStringfacsimileTelephoneNumber

Services -> LDAP -> Fax
S_LDAP_ATTRIB_TITLEmax. 64 characters; default = titleStringttle

Services -> LDAP -> Job Title
S_LDAP_ATTRIB_COMPANYmax. 64 characters; default = companyStringcompany

Services -> LDAP -> Company
S_LDAP_ATTRIB_STREETmax. 64 characters; default = streetStringstreet

Services -> LDAP -> Street
S_LDAP_ATTRIB_CITYmax. 64 characters; default = l (lower case of L)Stringl (lower case of L)

Services -> LDAP -> City
S_LDAP_ATTRIB_ZIPmax. 64 characters; default = postalCodeStringpostalCode

Services -> LDAP -> Zip
S_LDAP_ATTRIB_COUNTRYmax. 64 characters; default = friendlyCountryNameStringfriendlyCountryName

Services -> LDAP -> Country
S_LDAP_ATTRIB_NEWmax. 64 characters; default = <empty>String


Services -> LDAP -> Additional
XML based Net-Directory





S_NETDIR_NEW_LABELmax. 16 charactersString


It's the label of the new added Net Directory that will be present in the Provider List.
S_NETDIR_NEW_ADDRmax. 64 characters from (0-9,a-z,A-Z,-,.)String


Add New Provider -> Server Address
S_NETDIR_NEW_NAMEmax. 64 charactersString


Add New Provider -> Authentication name
S_NETDIR_NEW_PASSWmax. 64 charactersString


Add New Provider -> Authentication password
B_NETDIR_NEW_LOOKUP





S_NETDIR_WHITE_NAMEmax. 16 charactersString


White Pages -> Name of Directory
B_NETDIR_WHITE_ACTIVATE0: No (default)
1: Yes		Boolean0

White Pages -> Enable "White Pages"
S_NETDIR_YELLOW_NAMEmax. 16 charactersString


Yellow Pages -> Name of Directory
B_NETDIR_YELLOW_ACTIVATE0: No (default)
1: Yes		Boolean0

Yellow Pages -> Enable "White Pages"
S_NETDIR_PRIV_NAMEmax. 16 charactersString


Private NetDirectory -> Name of Directory
B_NETDIR_PRIV_ACTIVATE0: No (default)
1: Yes		Boolean0

Private NetDirectory -> Enable "White Pages"
B_XMLNETDIR_AUTOLOOKUP0: Disable (default)
1: Enable		Boolean1

Online Directory -> XML Net Directory Autolookup checkbox
Function Keys, index range: X=1-56





I_FUNCTION_KEY_TYPE_(X)0: default init (NULL) entry (end of list)
1: Park + Orbit
2: SpeedDial
3: BLF
4: Call Divert
5: DTMF
6: None (entry within the list with no function assigned)		Integer0


I_FUNCTION_KEY_CONNECTION_KEY_(X)0: Connection 1
1: Connection 2
2: Connection 3
     ~~~~~~~
11: Connection 12		Integer1

select VoIP account
S_FUNCTION_KEY_NUM_(X)max. 63 charactersString


Extention Number or Phone Number depending on function key type
S_FUNCTION_KEY_NAME_(X)max. 64 characters




S_DIRECTED_PICKUP_CODE_(X)max. 4 characters: 0, 1~9, * and # (default = **)String


Code is used to pick up a call from a blinking BLF-LED
System





Date & Time





B_AUTO_SYNC_TIME0: No
1: Yes (default)		Boolean


Time -> Automatic adjustment of System Time with Time Server
S_TIME_NTP_SERVERmax. 64 characters from (0-9,a-z,A-Z,-,.)String


Time -> Time Server
NOTE: Availavle when Automatic adjustment of System Time with Time Server is TRUE
I_TIME_ZONE

 1: Pacific/Majuro
 2: Pacific/Midway
 3: Pacific/Honolulu
 4: America/Anchorage
 5: America/Los_Angeles
 6: America/Tijuana
 7: America/Phoenix
 8: America/Chihuahua
 9: America/Denver
 10: America/Costa_Rica
 11: America/Chicago
 12: America/Mexico_City
 13: America/Bogota
 14: America/New_York
 15: America/Caracas
 16: America/Barbados
 17: America/Halifax
 18: America/Manaus
 19: America/Santiago
 20: America/St_Johns
 21: America/Sao_Paulo
 22: America/Argentina/Buenos_Aires
 23: America/Godthab
 24: America/Montevideo
 25: Atlantic/South_Georgia
 26: Atlantic/Azores
 27: Atlantic/Azores
 28: Atlantic/Cape_Verde
 29: Africa/Casablanca
 30: Europe/London
 31: Europe/Amsterdam
 32: Europe/Belgrade
 33: Europe/Brussels
 34: Europe/Sarajevo
 35: Africa/Windhoek
 36: Africa/Brazzaville
 37: Asia/Amman
 38: Europe/Athens
 39: Asia/Beirut
 40: Africa/Cairo
 41: Europe/Helsinki
 42: Asia/Jerusalem
 43: Europe/Minsk
 44: Africa/Harare
 45: Asia/Baghdad
 46: Europe/Moscow
 47: Asia/Kuwait
 48: Africa/Nairobi
 49: Asia/Tehran
 50: Asia/Baku
 51: Asia/Tbilisi
 52: Asia/Yerevan
 53: Asia/Dubai
 54: Asia/Kabul
 55: Asia/Karachi
 56: Asia/Oral
 57: Asia/Yekaterinburgo
 58: Asia/Calcutta
 59: Asia/Colomboo
 60: Asia/Katmandu
 61: Asia/Almaty
 62: Asia/Rangoon
 63: Asia/Krasnoyarsk
 64: Asia/Bangkok
 65: Asia/Shanghai
 66: Asia/Hong_Kong
 67: Asia/Irkutsk
 68: Asia/Kuala_Lumpur
 69: Australia/Perth
 70: Asia/Taipei
 71: Asia/Seoul
 72: Asia/Tokyo
 73: Asia/Yakutsk
 74: Australia/Adelaide
 75: Australia/Darwin
 76: Australia/Brisbane
 77: Australia/Hobart
 78: Australia/Sydney
 79: Asia/Vladivostok
 80: Pacific/Guam
 81: Asia/Magadan
 82: Pacific/Auckland
 83: Pacific/Fiji
 84: Pacific/Tongatapu

Integer


Settings -> System -> Time -> Time Zone
B_DAYLIGHT_SAVING0: No (default)
1: Yes		Boolean


Settings -> System -> Time -> Automatically adjust clock to summer-time changes
Security





S_ADMIN_PASSWORDmax. 16 charactersStringadmin

Change Administrator Password -> New Password
S_PROV_USERNAMEmax. 96 charactersString


System -> Security -> Broadsoft/Provisioning Username
WebUi Password to be used for Auto Provisioning/Broadsoft login username (to be used after device username, password fails for authentication)
S_PROV_PASSWORDmax. 32 charactersString


System -> Security -> Broadsoft/Provisioning Password
WebUi Password to be used for Auto Provisioning/Broadsoft login username (to be used after device username, password fails for authentication)
Reboot and Reset





B_AUTOREBOOT_TIME_OPTIONfalse: No (default)
true: Yes		Boolean



I_AUTOREBOOT_TIME_MINUTES
Integer



I_AUTOREBOOT_TIME_HOURS
Integer



Display





I_DEVICE_LANGUAGE

1: afrikaans
2: bahasa indonesia
3: bahasa melayu
4: catalia
5: cestina
6: dansk
7: deutsch
8: english(uk)
9: english (us)
10: espanol(espana)
11: espanol(estados unidos)
12: filipino
13: francias
14: hrvatski
15: isizulu
16: italino
17: kiswahi
18: latvesu
19: leituviu
20: magyar
21: nederlands
22: norsk bokmal
23: polski
24: portugese(brasil)
25: portusese(portugal)
26: romana
27: rumantsch
28: sloverncina
29: slovernscina
30: suomi
31: svenska
32: tiang vet
33: turksce
34: greek
35: belgium
36: russian
37: serbian
38: ukranian
39: hebrew
40: arabic
41: persian Farsi
42: afro asiatic-amharic
43: hindi
44: thai
45: korean
46: simplified chinese
47: traditional chinese
48: japanese

Integer9

System -> Display -> Display Formats -> Device Language
I_WEB_LANGUAGE

 0: Deutsch
1: English
2: Espanol
3: Italiano
4: Dutch
5: French
6: Danish
7: Polish
8: Swedish
9: Turkish

Integer1

Display Formats -> Web Interface Language
B_NAME_SORT

0: First Name
1: Surname

Boolean0

System -> Display -> Display Formats-> Sort Criteria Directory
Provisioning





S_DATA_SERVERmax. 255 characters from (0-9,a-z,A-Z,-,.)
default = profile.gigaset.net/device		Stringhttp://profile.gigaset.net/device

File Locations -> Data Server (default: profile.gigaset.net/device)
EXTENDED_PROFILE                                 max. 255 characters from (0-9,a-z,A-Z,-,.)String


URL to extra xml with extended configurable parameters
CERTIFICATEmax. 255 characters from (0-9,a-z,A-Z,-,.)String


URL to certificates.zip to be installed on device
S_AUTOPROVISIONING_CODE
String


Code to detect binary index file. For example 555
S_CONFIGFILE_URLmax. 255 charactersString


When this parameter is configured, the device will direct download the (xml) configuration file from the http server. If not configured, the Gigaset File structure is needed. 
REBOOTfalse : defaultBoolean


No value but special command tag which forces the device to reboot after profile download if enabled
Firmware Upgrade





B_AUTO_FIRMWARECHECK_ACTIVATE0: No (default)
1: Yes		Boolean0

Automatic check for software updates. WebUI: Settings->System->Firmware Update: Automatic check for software updates (Checkbox: Yes/No)
B_AUTO_PROFILECHECK_ACTIVATE0: No
1: Yes  (default)		Boolean1

Automatic check for profile updates. WebUI: Settings->System->Firmware Update: Automatic check for profile updates(Checkbox: Yes/No)
Screenshot





B_USE_POWERKEY_SCREENSHOT0: No (default)
1: Yes		Boolean0

WebUI: System -> Screenshot -> Screenshot via reset key
Syslog





B_SYSLOG_ALLfalse: No (default)
true: Yes		Boolean0


B_SYSLOG_SYSTEMfalse: No (default)
true: Yes		Boolean0


B_SYSLOG_SIP_EVENTSfalse: No (default)
true: Yes		Boolean0


B_SYSLOG_PHONEfalse: No (default)
true: Yes		Boolean0


B_SYSLOG_PROVISIONINGfalse: No (default)
true: Yes		Boolean0


S_SYSLOG_SERVERmax. 255 characters from (0-9,a-z,A-Z,-,.)String



I_SYSLOG_PORT514 (defaut)Integer514


B_SYSLOG_ENABLEfalse: No (default)
true: Yes		Boolean0


Miscellaneous





B_CHECKSYNC_ENABLE false: No (only for CTS)
true: Yes (default)		Boolean1

To perform SIP Multicast on device boot. No option in webui.
I_WEBUI_WEBSERVER_SWITCH_MODE0: Mode: administrator
Settings-webui-switch (by default): Disabled
WebUi default state (Jetty server): Always running.
In this mode only administrator will have control of webui. User will never be able to switch off webui via Android settings.On each reboot webui will start automatically.

1: Mode: user
Settings-webui-switch (by default): Enabled
WebUi deault state (Jetty server status): Running
In this mode, User will have full control of webui to switch on/off webui. On each reboot webui will start automatically.

2: Mode: cts
Settings-webui-switch (by default): Enabled
WebUi deault state (Jetty server status): not running
In this mode, User will have full control of webui to switch on/off webui. On each reboot webui will start automatically.		Integer1

WebUi -> Local Area and Networks (LAN) -> Select Mode 1. Administrator 2. User 3. CTS
B_EMERGENCY_NUMBER_N (N = 1 to 30)
Boolean0

For emergency numbers (to dial from phone lock screen) Not sure where this has to be added in WebUi ?
I_VOIP_CLIR_PRIVACY_LEVELnone (headers remain untouched): 0
user : 1
Net_Header : 2
NET_ID :64 (default = 64)
user+ Net_Header+  NET_ID : 67		Integer (Decimal)40

Note: In xml value mentioned as 43 is represented in internally considered as Hexadecimal value                                                     HEX BIN DEZ
0x00 = 00000000 = 0 (no privacy)
0x01 = 00000001 = 1 (privacy user)
0x02 = 00000010 = 2 (privacy header)
0x03 = 00000011 = 3 (privacy user+header)
0x40 = 01000000 = 64 (privacy ID)
0x41 = 01000001 = 65 (privacy user+ID)
0x42 = 01000010 = 66 (privacy header+ID)
0x43 = 01000011B = 67 (privacy user+header+ID)








  • No labels