Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Introduction

The N870 has one hardware, the device can have the following role.

DECT Base

  • By default, the device is a DECT Base.
  • A DECT base has no web-interface
  • If the device is configured as DECT Manager, you can reset this device to Base via: Web-interface: Settings - System - Reboot and reset - Reset to Base only.
  • Via the hardkey, see: FAQ N870 - Installation
  • Via the Power procedure, see: FAQ N870 - Reset to factory default

DECT Manager + DECT Base

  • Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - dynamic IP.
  • Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - keep IP.
  • Via the hardkey, see: FAQ N870 - Installation
  • Via the Power procedure, see: FAQ N870 - Reset to factory default

Integrator + DECT Manager + DECT Base

Integrator + DECT Manager

  • Web-interface:Settings - DECT Manager - Administration - Edit DECT manager - change Capacity to Medium.
  • Web-interface:Settings - Base stations - Administration - Edit Local Basestation - Activate base station to No.

DECT Manager


  • No labels