You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Valid for N670 / N870 / N870E but not supported by N610. Software 2.52 or higher is needed.


Here we would like to explain how to prepare your DECT system to be used for Alarming, Messaging and Location connected to an Alarm server.

  1. Gigaset prerequisites
  2. Nx70 Firmware update

1. Gigaset prerequisites

Scroll to top

  • An N670 with software 2.52 or higher, that supports up to 20 DECT handsets
  • An N870(E) with software 2.52 or higher, that supports up to 20.000 DECT handsets
  • An Gigaset PRO DECT handset
  • A license per DECT handset that is used for Messaging and/or Location

2. Nx70 Firmware update

Scroll to top

As we are continuous improving the software and adding new AML features please install the latest official software release.

Go to the wiki page: Firmware N870(E)/N670/N610 to download the latest firmware.

Upload the software via the web-interface:

The firmware is stored on the DECT manager and distributed to the base stations.

In the web-interface go to: SETTINGS - System - Firmware

  • Click Browse... and select the firmware file from your computer‘s file system.
  • Click Upload to upload the firmware file.
  • When ready, the pop-up "Press SET to start update schedule" will appear.
    The URL to the firmware file will change to the local storage: http://localhost/swupdate/<firmwarefile>
  • Select Immediately if you want to start the update now.
  • Scroll down and press SET
  • The firmware update will start after a few minutes.


  • No labels