Versions Compared

Old Version 3

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction
Column
width90%

This page describes how the Gigaset Nx70 devices are provisioned behind the Yeastar P-series. 

For this wiki article, we used:

  • Yeastar P550
  • Nx70 software 2.39.0

The Yeastar P-series supports up to 50 DECT handsets per DECT system:

  • N670 up to 20 Handsets
  • N670 with upgrade license can handle up to the Yeastar limit of 50 handsets
  • N870 can handle up to the Yeastar limit of 50 handsets

Therefore the N670 and N870 use the same provisioning template. 

Column
width10%
Valid for:
N670N870

The following features are supported by the Yeastar Auto Provisioning App.

  • N670 up to 20 handsets
  • N870 up to 50 handsets (N870 can handle 250 but for now limited by Yeastar to 50)
  • LDAP phone-book
  • Central phone-book
  • Call Waiting
  • Voicemail
  • Language
  • Admin Password
  • Tone scheme
  • Time zone
  • NTP server
  • Codecs
  • Firmware update

Add handsets/Accounts

You can configure your handsets by selecting the Extension and define the (internal) LDAP service.

Image Removed

To register the DECT handsets you need to open the Nx70 web-interface and start registration.

Features

  • Call Waiting: Disable / Enable Call Waiting on all DECT handsets
  • Voicemail: Disable / Enable the voicemail service on all DECT handsets
  • Central phonebook: The URL to a central phonebook, this is not the Yeastar (LDAP) phonebook. See below on this page for more info.

Image Removed

Preferences

  • Language: The web-interface language of the system.
  • Admin Password: In the field, configure your admin password. If this is empty, your password entered during Nx70 installation will not be overwritten.
  • Tone Scheme: The tone scheme of the country where you use the system.
  • Primary NTP Server: The NTP server URL you want to use.

Image Removed

Codec

If you disable the G.729 codec you will have more channels on the DECT base. (10 instead of 8)

Image Removed

LDAP

  • Directory name: The name of the phone-book, visible in the DECT handsets,
  • Server Address: The IP address of the Yeastar PBX
  • Server Port: The LDAP server port (389)
  • LDAP Search base (Base DN): dc=pbx,dc=com
  • Username: cn=admin,dc=pbx,dc=com
  • Password: password

Image Removed

Firmware update

Via the firmware update page you can add the latest Nx70 software. (Yeastar require to change the name of the firmware file as no special characters are allowed) You need to start provisioning by entering the Nx70 config in Yeastar and just press save.

Yeastar will send a SIP notify and provisioning/firmware update is then started.

Image Removed

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleFirst steps to connect Nx70
  1. Start with an factory default Nx70.
  2. During boot the Nx70 will send a SIP multicast and the device will be visible in the Yeastar web-interface.


3. Via the Edit button  configure your device

4. Save the configuration

5. Reboot the Nx70

6. The device is configured after reboot

Info

After this, it is not needed to reboot the device anymore, even if it is mentioned in the Yeastar web-interface.

Changes made in Yeastar are triggered via sip-notify and auto-provisioning is started without a reboot.

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleConfiguration


IP Phone
Expand
titleIP Phone

Image Added

Automatic selected by Yeastar based on the user-agent. 

Options
Expand
titleOptions

Image Added

Yeastar offers a default provisioning template for a device. Custom templates can be created and if available, it will be visible here.

Assign Extension
Expand
titleAssign Extension

Image Added

Select the handsets and assign it to an Extension. Limited by Yeastar: up to 50 DECT handsets per device

Preference
Expand
titlePreference

Image Added

  • Phone Web Language of the N870/N670
  • N870/N670 Tone selection: SETTINGS - Telephony - Call settings - Tone selection
  • Phone Password: The N870/N670 web-interface admin login password
  • Primary NTP server: SETTINGS - System - Date and Time - Time server
  • Time Zone: SETTINGS - System - Date and Time - Time zone


4. Save the configuration

5. The Yeastar should inform the N870/N670 about a new configuration and provisioning should be started. If this does not work then:

a. Download the provisioning file from the Yeastar web-interface.

Image Added

b. Search for the provisioning URL in the file: Example: 
<!-- Provisioning URL -->
<param name="Provisioning.global.ProvisioningServer" value="http://192.168.3.150:7778/api/autoprovision/4HTPrDkJ0MZXwKqC/589ec62904f3.xml"/>

c. Copy the URL in the N870/N670 (SETTINGS - System - Provisioning and Configuration) and start provisioning.



Panel
titleColor#F85404
titleBGColor#F0F0F0
titleUsing your own provisioning templateFirmware update

In the Yeastar web-interface go to: Auto provisioning - Resource Repository - Device firmware and upload the new firmware like the example below.

Image Added

Go back to Phones and select your device and click on Image Added

Yeastar offers the possibility to upload your own provisioning template.

Just create an XML provisioning file with all settings and upload via the Yeastar Provisioning App - Upload Files.

Make sure the name of the file is the <MAC address>.xml, see example below.

Image Removed


Panel
titleColor#F85404
titleBGColor#F0F0F0
titleCentral PhonebookKnown issues
  • Call transfer of external calls, results in disconnected call.

This can be fixed by changing the following setting in the Nx70.

In the web-interface go to: Settings - Provider or PBX profiles - Edit

Change Signalling options for 'Hold' in Session Description Protocol (SDP) to sendonly

Image Added

Yeastar offers the possibility to upload and host your own Central Phone-book.

Just create an Central Phone-book with all contacts and upload via the Yeastar Provisioning App - Phonebook.

Image Removed

Edit the device settings and go to Features - Central phonebook: 

The Phonebook URL =

Example: https://192.168.178.210:8088/tftpboot/upload/phonebook/LocalPhonebook_100contacts.xml

IP address needs to be changed to match the Yeastar S-series.

The name depends on the phone-book name you have uploaded.

Image Removed