You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

Valid for:

N530

N610

N670

N770

N870

N870E

Embedded Integrator

Virtual Integrator

Introduction


Auto-provisioning
<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
<nvm>
 
    <!-- switch on SUOTA -->
    <param name="DmGlobal.0.SuotaEnable" value="1" />
 
    <!-- configure SUOTA package with the URL to the SUOTA binary -->
    <!-- URL always needs to be unique for each binary, e.g. Ein2 will not recognize if binary is replaced on the server without changing the path
	URL examples:
	SL800H 131.13.04: profile.gigaset.net/device/suota/sl800/13_04.bin 
	R700H protect 136.006.04 : profile.gigaset.net/device/suota/r700_protect/blp_p1_suota__upd.bin
	
	CrewPTT Nightbuilds

	SL800H 131.13.06: profile.gigaset.net/device/suota/sl800/13_06_rc1.bin
	SL800H fake 131.13.06: profile.gigaset.net/device/suota/sl800/13_06_rc1_fake.bin
	R700H/S700H 130.13.06: profile.gigaset.net/device/suota/r700_s700/13_06_rc1.bin
 	R700H/S700H fake 130.13.06: profile.gigaset.net/device/suota/r700_s700/13_06_rc1_fake.bin 
	CH21D: profile.gigaset.net/device/suota/ch21/144_03.bin
     -->
    <param name="SuotaPackage.1.Url" value="profile.gigaset.net/device/suota/ch21/144_02.bin" />
 
    <!-- configure SUOTA window when SUOTA should be started (duration is given in minutes) -->
    <param name="SuotaWindow.1.Enabled" value="1" />
    <param name="SuotaWindow.1.Name" value="Window 1" />
    <param name="SuotaWindow.1.StartTime" value="13:20" />
    <param name="SuotaWindow.1.Duration" value="120" />
    <param name="SuotaWindow.1.DaysOfWeek" value="mon,tue,wed,thu,fri,sat,sun" />
 
    <!-- assign SUOTA window to the HS:
           0 -> SUOTA not allowed for the HS
           1 -> SUOTA window 1
           2 -> SUOTA window 2
           255- > only SUOTA pull is possible (currently default) 
	The @ sign takes care that all required handsets receive the SOUTA push trigger
	-->
    <param name="hs.@.SuotaWindow" value="1" />
 
</nvm>
</provisioning>
Syslog output example
Update SUOTA software version 
Next opening of the SUOTA window 1 will be on 2025-09-26 13:20:00
SUOTA window 2 is not enabled
Next request in 151 seconds
wildcard write done
Download firmware version from: profile.gigaset.net/device/suota/ch21/144_02.bin


The DECT system will download a partial of the file to collect the software version information.

HTTP request
HTTP	GET /device/suota/ch21/144_02.bin HTTP/1.1 
HTTP	HTTP/1.1 206 Partial Content 
Syslog output example
Update SUOTA software version 144.002.00
Syslog output example
Open SUOTA window: 1
Next request in 7200 seconds
Trigger SUOTA push notification in window 1
Trigger SUOTA push notification to HS 0
HTTP full download of the SUOTA software
HTTP	GET /device/suota/ch21/144_02.bin
HTTP	HTTP/1.1 200 OK 


After successful software update you will see:

Web-interface:

Syslog:

Syslog output example
SW version of HS 0 updated from 144.001.00 to 144.002.00





  • No labels