You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Introduction

Here we describe how to provisioning an Gigaset Maxwell device behind an 3CX PBX.

Maxwell provisioning behind 3CX local PBX

We have a running 3CX system with configured users.

  • Start with factory reset Maxwell device
  • Maxwell will boot and after boot send a SIP Multicast

In the 3CX web-interface you can see under Phones the Maxwell:

  • Select the Maxwell device
  • Click on Assign Ext

Select the extension.

  • Press OK
  • Phone Provisioning page is opened
  • Change the settings
  • Press OK
  • The Maxwell is configured via auto-provisioning



Maxwell provisioning behind 3CX cloud PBX

We have a running 3CX cloud system with configured users.

  • Start with factory reset Maxwell device
  • In the 3CX web-interface go to: Phones - Add Phone
  • Assign the Phone to extension
  • Select the extension
  • Press OK
  • Add phone page is opened
  • Select the Gigaset device and enter the MAC Address

  • Press OK
  • Change the settings
  • Select if you are using SBC or STUN
  • Copy the Provisioning Link
  • Press OK
  • Open the web-interface of the Maxwell
  • Go to: SETTINGS - System - Provisioning and Configuration
  • Copy the provisioning URL into the field Provisioning Server

  • Click on Start Auto Configuration
  • The Maxwell is configured via auto-provisioning



  • No labels