Page tree
Skip to end of metadata
Go to start of metadata

DX800 enabling Redirect Server

Dependent on the DX800 variant, it can be that the redirect server option is disabled. This can only be enabled via special configuration, for this you need a patch. The patch is based on the variant and contains the following settings to enable redirect server.

 

DX800 enable redirect

BS_IP_Data1.ucB_HAS_PROVISIONING_CODE=1
BS_IP_Data1.ucB_SHOW_PROVISIONING_CODE_IN_HS=1
BS_IP_Data1.ucB_AUTOPROVISIONING=0
BS_IP_Data1.ucI_AUTOPROVISIONING_STYLE=0
BS_IP_Data1.ucB_AUTO_UPDATE_PROFILE=1
BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_1=1
BS_IP_Data1.aucS_AUTOPROVISIONING_CODE=0x34,0x34,0x34

Via the restore option, you can activate the patch below. If you variant is not listed you need to request this from Gigaset.

As most of the DX800 parameters are the same like N510, you can also use the online tools for N510 to create config files.


Parameter-Namepossible ValuesWeb-UIWhere to find / Description

B_... - boolean expressed as 1/0.


I_... - integer value in range +/-(2^15 - 1)


S_... - string value, e.g. “Ala ma kota” (entered without quotation signs).

Service-specific-data


I_TDS_AUTHENTICATION_MODE0=ROM data / 1=USER data / 2=ROM or USER data / 3=SIP authentication modeNoThis parameter tells where HTTP auth login/password is stored. Value 3 is very usefull option. In this mode HTTP login and password will be get from first SIP account data.
B_TDS_TRANSMIT_MAC_ADDRESS
Noshould mac address of device be included in every request "bTDSTransmitMacAddress = 1".
S_TDS_ISO_3166_1
YesWebUI-Country-code-for-Telephonebook-entry
S_TDS_TXT_AL_HEADER


S_TDS_TXT_NAME


S_AVAILABLE_OTDP
YesWebUI-Available-Telephonbooks-under-Services (default:6B747467656E67736862736500FFFFFF)
S_TDS_MNEMONIC
YesWebUI-Active-Telephonebook-under-Services
S_TDS_SERVICE_URL
NoURL address of the phonebook server (must be ended with ?)
S_TDS_LOGIN
Noif phonebook server requires authentication (only HTTP Digest MD5 is supported)
S_TDS_LOGIN_PASS
NoCRYPTED password (password can be generate by sw-development)
I_TDS_CAPABILITIES
Noprovider capabilities "aucTDSCapabilities". Capabilities byte are combined from following bits:
  AEIP_OTDP_CAP_PEOPLE_SEARCH = 0x01, <-- white pages
  AEIP_OTDP_CAP_BUSINESS_SEARCH = 0x02, <-- yellow pages
  AEIP_OTDP_CAP_REVERSE_LOOKUP = 0x04, <-- search by phone number
  AEIP_OTDP_CAP_PRIVATE_NETWORK_DIRECTORY = 0x08, <-- 3rd book  type - private phonebook
  AEIP_OTDP_CAP_AUTO_LOOKUP = 0x10, <-- if reverse lookup is active, all incoming calls will be looked inside netdir and caller name will be presented on display
  AEIP_OTDP_CAP_NICKNAME_FOR_PRIVATE_NETWORK_DIRECTORY = 0x20, <-- private phonebook supports user defined firmware
  AEIP_OTDP_CAP_ENCRYPT_POSTS = 0x40, <-- private phonebook - all sent data will be encrypted
S_TDS_TXT_MENU
NoHandset-Telephonebook-Search-Menue-Header
S_TDS_TXT_HEADER
NoHandset-Telephonebook-Search-Result-Header
S_TDS_TXT_SEARCH_1
NoHandset-Telephonebook-Search-note-Line-1
S_TDS_TXT_SEARCH_2
NoHandset-Telephonebook-Search-note-Line-2
S_TDS_TXT_DEP_MENU
NoHandset-Yellowpages-Search-Menue-Header
S_TDS_TXT_DEP_HEADER
NoHandset-Yellowpages-Search-Result-Header
S_TDS_TXT_DEP_SEARCH_1
NoHandset-Yellowpages-Search-Note-Line-1
S_TDS_TXT_DEP_SEARCH_2
NoHandset-Yellowpages-Search-Note-Line-2
S_OTDP_AUTH_PASS
No
S_TDS_TXT_PTD_MENU
NoHandset-Private-Phonebook-Search-Menue-Header
S_TDS_TXT_PTD_HEADER
NoHandset-Private-Phonebook-Search-Result-Header
S_TDS_TXT_PTD_SEARCH_1
NoHandset-Private-Phonebook-Search-Note-Line-1
S_TDS_TXT_PTD_SEARCH_2
NoHandset-Private-Phonebook-Search-Note-Line-2
S_OTDP_AUTH_NAME
No
IP Configuration


B_USE_DHCPboolean true/falseYesSettings --> IP-configuration --> IP address type
I_IP
YesSettings --> IP-configuration --> IP address
I_SUBNET_MASK
YesSettings --> IP-configuration --> Subnet mask
I_DEFAULT_ROUTER
YesSettings --> IP-configuration --> Default gateway
I_DNS_SERVER_1
YesSettings --> IP-configuration --> Preferred DNS server
I_DNS_SERVER_2
YesSettings --> IP-configuration --> Alternate DNS server
B_ACCEPT_FOREIGN_SUBNETboolean true/falseYesSettings --> IP-configuration --> Allow access from other networks
B_HTTP_PROXY_ENABLED
YesSettings --> IP-configuration --> Enable proxy
S_HTTP_PROXY_URL
YesSettings --> IP-configuration --> Proxy server address
I_HTTP_PROXY_PORT
YesSettings --> IP-configuration --> Proxy server port
B_SHOW_QUESTION_MARK_IN_WEB
YesQuestion mark in the right-upper corner
B_SHOW_SECURITY_ADVICE
YesSecurity advice after login if password or similar is not changed
I_HTTPLANGUAGE
YesBefore login you can change the WebUI-language
// enabled web languages


B_WEB_LANGUAGE_ENABLED_ENG
YesOffered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_GER
YesOffered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_FRE
YesOffered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ITA
YesOffered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_NDL
YesOffered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ENGUS
YesOffered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ARA
YesOffered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_RUS
YesOffered languages for the WebUI (at login!)
B_SIP_USE_STUN_SHC
YesSettings --> Telephony --> Connections --> Gigaset.net --> STUN enabled
Advanced VOIP settings


 B_DTMF_TX_MODE_AUTO
YesSettings --> Telephony --> Advanced Settings --> Send settings
 I_DTMF_TX_MODE_BITS(BITS!) 1=audio, 2=RFC 2833, 4=SIP INFOYesSettings --> Telephony --> Advanced Settings --> Send settings
B_USE_R_KEY_FOR_CALL_TRANSFER
YesSettings --> Telephony --> Advanced Settings --> Use R-Key to initiate call transfer with the SIP Refer method
B_CT_AFTER_ON_HOOK
YesSettings --> Telephony --> Advanced Settings --> Transfer Call by On-Hook
B_USE_RANDOM_PORT
YesSettings --> Telephony --> Advanced Settings --> Use random ports
I_SIP_LOCAL_PORT
YesSettings --> Telephony --> Advanced Settings --> SIP port (min)
I_RTP_LOCAL_PORT
YesSettings --> Telephony --> Advanced Settings --> RTP port (min)
I_SIP_LOCAL_PORT_MAX
YesSettings --> Telephony --> Advanced Settings --> SIP port (max)
I_RTP_LOCAL_PORT_MAX
YesSettings --> Telephony --> Advanced Settings --> RTP port (max)
B_VOIP_CALLWAITING_STATUS
Yes
B_CTO_REFER_TO_PREFERRED_CONTACT
YesSettings --> Telephony --> Advanced Settings --> Preferred Refer To
B_CTO_REFER_TO_AUTOMATIC
YesSettings --> Telephony --> Advanced Settings --> Automatic Refer To
Audio settings


B_ONLY_ONE_ACTIVE_VOIP_CALL
YesSettings --> Telephony --> Audio --> Allow 1 VoIP Call only
I_SIP_PREDEFINED_VOCODER
Yes
I_SIP_AVAILABLE_VOCODER
Yes
Number assignment


B_AUTOMATIC_FALLBACK_TO_PSTN
YesSettings --> Telephony --> Number Assignment --> Automatic fallback to fixed line
B_ENHANCED_AUTOFALLBACK
YesSettings --> Telephony --> Number Assignment --> Enhanced Auto-Fallback
S_PSTN_NAME
YesSettings --> Telephony --> Connections --> Fixed Line --> Connection Name or Number
Dialing plans


I_DIALING_PLAN_COUNTRY_ID
YesSettings --> Telephony --> Dialling Plans --> Country
S_CITY_CODE
YesSettings --> Telephony --> Dialling Plans --> Local Area Code
B_USE_CITY_CODE
YesSettings --> Telephony --> Dialling Plans --> Predial area code for local calls through VoIP
S_SIP_SHC_DISPLAYNAME
NoHandset!! --> Call gigaset.net --> Options --> Own details
B_SHC_CALLFORWARDING_STATUS_1
YesSettings --> Telephony --> Call Forwarding --> Gigaset.net
I_SHC_CALLFORWARDING_WHEN_1
YesSettings --> Telephony --> Call Forwarding --> Gigaset.net --> When
S_SHC_CALLFORWARDING_NUMBER_1
YesSettings --> Telephony --> Call Forwarding --> Gigaset.net --> Call number
B_SIP_SHC_ACCOUNT_IS_ACTIVE
NoEnable Gigaset.net account
E-mail


S_EMAIL_SERVER
YesSettings --> Messaging --> E-Mail --> POP3 Server
S_EMAIL_USERNAME
YesSettings --> Messaging --> E-Mail --> Authentication Name
S_EMAIL_PASS
YesSettings --> Messaging --> E-Mail --> Authentication Password
I_EMAIL_POLL_TIMEValue in minutesYesSettings --> Messaging --> E-Mail --> Check for new e-mail
Info Services


B_SHOW_INFO_SERVICE_SERVER_ADVICE
YesSettings --> Services --> Advice under "Activate Info Services"
B_INFO_SERVICE_ACTIVE
YesSettings --> Services --> Activate Info Services
S_INFO_SERVICE_URL
NoURL for the Info-Services-Server
Management Date & Time


S_TIME_NTP_SERVER
YesSettings --> Management --> Date&Time --> Time Server
B_TIME_USE_AUTOMATIC_NTP_SYN
YesSettings --> Management --> Date&Time --> Automatic adjustment of System Time with time server
I_TIME_COUNTRY
YesSettings --> Management --> Date&Time --> Country
I_TIME_TIMEZONE
YesSettings --> Management --> Date&Time --> Time Zone
B_TIME_USE_AUTOMATIC_DST
YesSettings --> Management --> Date&Time --> Automatically adjust clock to summer-time changes
B_HAS_NTP_SETTINGS
No
Miscellaneous


B_SHOW_VOIP_STATUS_ON_HANDSET
YesSettings --> Management --> Miscellaneous --> Show VoIP status on handset
Firmware Update


S_DATA_SERVER
YesURL for the gigaset.net-server
Provisioning-specific-data


// TR-069


S_DEV_MGMT_SRVR_URL
No
S_DEV_MGMT_SRVR_USER
No
S_DEV_MGMT_SRVR_PW
No
I_DEV_MGMT_SRVR_INF_EN
No
I_DEV_MGMT_SRVR_INF_INTV_O
No
S_DEV_MGMT_SRVR_PARKEY
No
S_DEV_MGMT_SRVR_CONN_USER
No
S_DEV_MGMT_SRVR_CONN_PW
No
S_DEV_MGMT_SRVR_OUI
No
S_DEV_PRODCLASS
No
S_DEV_MGMT_SRVR_SERNUM
No
B_TR069_SEND_TRANSF_COMPL
No
S_TR069_COMMAND_KEY
No
S_TR069_AES_KEY
No
B_BOOTSTRAP_TRIGGER
No
B_TR69_MGMT_ENABLED
No
I_DEV_MGMT_SRVR_INF_INTV
No
B_HAS_PROVISIONING_CODE
No
B_SHOW_PROVISIONING_CODE_IN_HS
No
B_DO_AUTOMATIC_UPDATES
YesGeneral indication if a check for new FW / Profie will occur every night.
B_AUTO_UPDATE_FW
NoIndication if a new firmware will be stored directly, without user interaction and signalling via MWI (forced update). 
B_AUTO_UPDATE_PROFILE
NoIndication if a new Profile will be stored directly, without user interaction and signalling via MWI (forced update). 
I_REMINDER_FW_UPDATE
NoValue in "x" days! If the value is greater than 0, the customer will get a reminder via MWI again after "x" days. 
I_REMINDER_PROFILE_UPDATE
NoValue in "x" days! If the value is greater than 0, the customer will get a reminder via MWI again after "x" days. 
S_USER_FIRMWARE_URL
No
// Auto-Provisioning Codes/Modes


S_AUTOPROVISIONING_CODE
YesSettings --> Telephony --> Account 1 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_2
YesSettings --> Telephony --> Account 2 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_3
YesSettings --> Telephony --> Account 3 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_4
YesSettings --> Telephony --> Account 4 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_5
YesSettings --> Telephony --> Account 5 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_6
YesSettings --> Telephony --> Account 6 --> Auto Configuration Code
I_ONESHOT_PROVISIONING_MODE_1
No
I_ONESHOT_PROVISIONING_MODE_2
No
I_ONESHOT_PROVISIONING_MODE_3
No
I_ONESHOT_PROVISIONING_MODE_4
No
I_ONESHOT_PROVISIONING_MODE_5
No
I_ONESHOT_PROVISIONING_MODE_6
No
  • No labels