Release notes N510 IP PRO

Software 42.261, March 2022

Bug-fixes and improvements:

• • TR-069 improvements
  • Support for new DECT handsets
  • STUN can be disabled if needed
  • Multiple bugfixes ...

Software 42.259, July 2021

Bug-fixes and improvements:

• • XSI Broadsoft phonebook improvement
  • Support of new handsets
  • Broadsoft CLIP/CNIP size
  • Other minor bugfixes ...

Software 42.258, November 2020

Bug-fixes and improvements:

• Auto-provisioning, HTTP digest use HTTP credentials before factory credentials when configured
• Support new 2021 DECT handsets
• Reboot fix
• Handset firmware update via SUOTA failed

Software 42.257, September 2020

Bug-fixes and improvements:

• TLSv1.2 for:
  • Provisioning
  • XSI Phone-books
• Register request with Authorization Digest: QOP = "auth-init"
• RFC3264 For each "m=" line in the offer, there MUST be a corresponding "m=" line in the answer
• cookie length 1024 too short
• Maxwell C behind S650 IP PRO

Software 42.250, July 2019

Bug-fixes and improvements:

• After update to 248 TLS V1.1 not default
• [XSI phonebook] Only number in search (NAME)
• Handling excessive reINVITEs with RTP sent in the wrong codec
• Re-INVITE without SDP (MoH)
• Broadsoft (XSI) - Phonebook: Not possible to dial a number from "group" directory
• Broadsoft Conference (N-way)
• Defining the time span when the device checks for updates

Software 42.248, December 2018

Bug-fixes and improvements:

• Client certificate and TLS V1.1 is enabled by default (automatically generated / enabled after update).

• DNS-SRV improvement.

• Fall-back during active call.

• Subscribe when on Failover server is send to main server.

• Saving LDAP entry in to local phone book.

• Possible reboot when dialing Feature code (#51)

• Dialing with pause "P" not possible.

• N510 Name resolution „Unknown“

Software 42.247, July 2018

Bug-fixes and improvements:

• TLSv1.1 is the default protocol when secure auto-provisioning is used (only activated after a factory reset).
• Reboot protected by PIN if default PIN code basis is changed.
• Maxwell Cordless is supported with full functionality.
• After successful call transfer, "recall" returns to transferor.
• [LDAP] Wrong characters are displayed in LDAP
• HTTP Digest authentication improvement

Software 42.245, December 2017

Bug-fixes and improvements:

• Broadsoft, every DECT handset can use there own phone-books.
• Broadsoft, default XSI URL can be changed if provider requires this.
• Bootloader, when firmware update is started, also User Agent is send.
• New search queries for SEARCH.CH
• XSI phone-books do not support special characters.
• Call lists improvement when number contains special characters.
• Repeater improvements.
• LDAP improvements.

Software 42.243, August 2017

Bug-fixes and improvements:

• DHCP option 114 improvement
• Changing ptime from 20 ms to 30ms is now possible via provisioning
• DNS SRV is now working when platform returns an Error 500
• Random Call-ID for "message-waiting" subscribe after restart
• Correction for MWI subscribe 2nd handset is only sent one time
• Provisioning, DHCP option improvements
• Local storage of Spanish language

LDAP/Online Directories:

• LDAP German characters are now shown correctly
• LDAP mobile device specific authentication problem fixed
• Reboot after LDAP request problem fixed
• Wrong display of Turkish characters in online directories fixed

Russia:

• Support Provisioning Digest
• Cyrillic characters in XML phonebook are now shown correctly

Software 42.242, June 2017

Bug-fixes and improvements:

• Broadsoft XSI Phonebooks
  

• Turkish language/character set also in menus/directory contents

• Turkish translations updated

• Hungary: Call progress tone scheme added

• SIP UPDATE can be enabled/disabled in Web Configurator 

• Unexpected call termination after n minutes because of SIP UPDATE - '501 Not Implemented Here' - fixed

• CLIP/COLP not updated via re-invite message - fixed

• Lack of speech-path when trying to transfer call - fixed

• Remove expired/not needed certificates

• Offer current cipher suites for successful TLS handshake

• HTTPS phone-book: certificate not loaded automatically - fixed by added TLS Support switch and web configurator setting

• Device no longer goes to a loop when checking details of the first certificate
• SUOTA: Handset sends invalid SW version within SW version indication message fixed
• Web Configurator status page enhanced
  • Uptime since last power interruption
  • Details of registered handsets: product type, part-number, firmware version, connection status with check status button
• MTU negotiation (PMTUD) improved
• Blocking Register when router misses WAN link
• Send key does not work properly in "Next Call Anonymous"

• Blocked number is no longer visible in redial list

• LDAP "Service not available" - fixed

Software 42.240, November 2016

Bug-fixes and improvements:

• LDAP:
  • autolookup problem solved / LDAP buffering
  • character set problem fixed
  • various problems fixed
• SUOTA problem fixed
• Base no longer resets while specific address is set in configuration file (URL)
• Occasional reboot after 'No entries found' popup fixed 
• Innovaphone PBX registration problem solved
• Web configurator also in Turkish language
• Russia: CLIP problems fixed
• Russian/Czech translations corrected
• Nordic language special characters in display name improved
• "Configuration file (URL)" input field can be locked
• Caller ID update after call forwarding behind "Deutsche Telekom Digitalisierungsbox" problem solved
• Metaswitch: Configuration file URL length enhanced to 255 characters
• SIP Authentication name field length enhanced to 74 characters
• Broadsoft: Codec renegotiation optimized
• Broadsoft: No RTP after long 'on hold' state problem fixed
• Long names in name replacement improved
• Provisioning parameter problem solved
• Provisioning handset name truncation to 9 characters problem solved
• Secure provisioning via https is now also possible when XML has more than 200 lines/parameters
• In rare cases, handset did not terminate call when external subscriber hang up behind "Deutsche Telekom Speedport 724V" 
• Online directory improvements
• DNS SRV:
  • Possibility to enable in Web Configurator
  •  Configuration in combination with DHCP option 120  improved
• Auerswald 5000R PBX: One way audio problem fixed

Software 42.231, December 2015

Bug-fixes and improvements:

• New handset SL750H PRO has full compatibility

• TLS: Optimization of the "Private Key Generation" procedure

• Optimized security by disabling IP dialling

• Include MAC address in UA-header

• XML phonebook - White/Yellow pages search field: 'City' now optional

• VOIP INVITE with send only not accepted by TELEKOM server

• Only 'All DECT' handsets option is available in  'Call Forwarding' list after registration to base station

• Exception occurred when handset was deregistered or when send connections were changed

• It is not possible to set own area code number in case option 'Other Country' has been selected
• SIP/RTP  port range configured in Web Configurator is not used in case of "Use random port  mode = on"
• Bug in VoIP Wizard
• R630H PRO and SL610H PRO Call list is closed after few seconds
• Starface PBX manager is not working
• Unwished deleting of message waiting indicator with call lists
• Copy phone number from call list to directory is not always possible –   phone comes back to Idle
• Wrong caller ID after call transfer
• TR-069: Change format of software version
• TR-069: Change ProductClass/Modelname

• Handset name provisioning with special characters leads to incorrect result in WebUI.

• Special characters are not provisioned correctly.

• BS sends Busy signal to server, when 1 call is running on INT2 and another comes in for another SIP profile on INT1, when Call waiting is deactivated.

• If INT2 is in an external call, then no external connection to INT1 is possible. INT1 is busy.

• SIP Session Timers according the RFC 4028: Session-refresh is now preferred via UPDATE, if supported by both peers

Software 42.210, February 2015

Bug-fixes and improvements:

• New handset support:
  • Gigaset S650H PRO full support
• Web Configurator: Firmware update page can be hidden by provisioning parameter
• SIP Session Timers implemented according to RFC 4028
• Blind transfer: Improve behavior when device is blind transferred by another party

• NL - RoutIT: 2 - 3 seconds delay of audio path after call pickup

• Broadsoft/Telepo: only 2 of 4 handsets are ringing in call group
• DTMF problem behind Sonus gateway fixed

Known Issues:

• Reboot occurs after de-registering handset
• Gigaset T300/T500 PBX: Handset name is not replaced after provisioning to Celsius server
• Copy phone number from call list to directory is not always possible – phone goes back to idle
• After firmware update system PIN is changed to default '0000'

Software 42.207, October 2014

Bug-fixes and improvements:

• Added support in TR 069 for Device.DeviceInfo.ModelName and Device.DeviceInfo.HardwareVersion

• Introduced hard-coded languages in WebUI for Germany, Polish, French, English (no need to download language package)

• Implement Periodic Inform over SSL

• Implement SW downgrade using TR069

• Multiple access to WebUI using HTTP digest (as a User and Administrator) 

• WebUI HTTP digest password is in sync with TR069 connection request password

• Sending HTTP digest auth retransmission in the same TCP streams

• implemented 2-way authentication over SSL connection 
• Multiple access to LDAP (only for N510)

• TR069

  • TR069 if HTTP digest has been configured together with TLS

  • Reboot and Factory Reset for Smart Motive certification

• Aligned translation for Eco Mode and Eco Mode + in WebUI to use new texts - Maximum Range and No Radiation

• Display message "Provider registration failed"
• 2 to 3 seconds delay of begin of audio path after call pickup

Software 42.199, June 2014

Bug-fixes and improvements:

• Config file can be downloaded direct from server (URL) not using Gigaset file structure.
• Firmware can be downloaded direct from server (URL) not using Gigaset file structure.

• Support for INVITE request with a replaces header

• Interop,URI parameter is missing
• LDAP functionality has been improved (-> LDAP-Step-by-step-Guide):
  • possible to assign username and password for each HS
  • only single access to LDAP is supported
  • added new attribute streetAddress
  • it is possible to configure maximal number of search result in WebUI for LDAP
  • additional attribute has checkmark to indicate possibility to use it as number source and start call, available via WebUI
  • introduced new default “live search” and mode switch in WebUI
    • Mode 1:(default): new character based "live search" with instant update of search results
    • Mode 2: traditional search request entry: name, city like in public directory search  
• Missed Calls Counter can now be switched on/off in WebUI per account

• Corrected vCard Transfer via WebUI with special characters
• Minor bug fixes and improvements
• Timer change to 300s retry: phone fails in SIP Registration unable to be authenticated.
• No (dial)tone in certain call stages.
• When using TCP as transport protocol, the BS does not send BYE to the sip server.

Software 42.196, April 2014

Bug-fixes and improvements:

• TR069 - option 43 implemented
• Fall Back to PSTN when SIP not available
• SIP USER ID in HTTP GET request
• If protocol settings in web-interface is on TCP but DNS answers with UDP, the web-interface settings are used.
• BROADSOFT: New parameter <I_PHONE_SYSTEM>
• BROADSOFT: CHECK-SYNC processing change
• BROADSOFT: HTTP digest
• BROADSOFT: Provisioning authentication
• BROADSOFT: <MAC_ADDRESS> processing change
• LDAP: Special character search
• LDAP: Use display format entry for name replacement, header and list of results of search
• LDAP: Create setting to switch name replacement on/off
• LDAP: 12. If 'now show' flag is set, do not show the tagged entry
• LDAP setup - Username field not long enough
• Email: SSL problem solved
• No dial/ringing tone in some call status behind some providers/platforms
• Device not visible in gigaset-config.com web-site
• Auto provisioning: Device doesn't get extended profile after factory reset.
• Initial SIP request might have wrong public port, authenticated repetition is correct
• Reboot possible when call forwarding at Broadsoft (Connect with Hold)
• Reboot after SIP account registration
• When using TCP as transport protocol, the BS does not send BYE to the sip server
• HOLD "to terminal" not working properly
• Base indicates "busy" when the caller terminates the call

Software 42.194, November 2013

Bug-fixes and improvements:

• Improved handling of SIP notify messages (Call ID-changed) behind 3CX
• Device sends double DTMF tones.

Software 42.192, October 2013

Bug-fixes and improvements:

• Gigaset S820H, SL910H and SL930H now have better integration. (N300/A510IP/C610IP)
• Compatibility Repeater 2.0
• Different changes for Special PBX Vendor
• Nordics: countries call progress tones to be supported: Danish, Swedish, Norwegian, Finnish
• SIP USER ID in HTTP GET request
• Auto-provisioning - No longer is it necessary for the version value to be included in the XML. (NB But if it is included it is still a requirement that it should increment from previous version for the GET to operate)
• HTTP Digest username and Password can be changed by the web-interface.
• After 3-4 weeks handset loses connection to base
• Base reboots sporadically
• Handset disconnect for incoming and outgoing calls
• N510 breaks down during take over an incoming call with R410H

Known Issues:

• Double DTMF tones are send

Software 42.081, August 2013

Bug-fixes and improvements:

• Access code special treatment in call-list for Nordic customer.
• DTMF control already at 180 ringing state and not only after 200 ok.
• Gigaset R630 support.
• Auto-provisioning update timer no reboot needed to activate.
• TR-069 - Zero Touch Activation
• Assign NTP server via DHCP
• Possibility to accept non trusted certificates automatically
• Instability of Base-station in some environments.
• Language problem (Czech language)
• Radio-buttons for Date & Time are on wrong position
• SIP call cannot be answered when is made 2s after the last one
• New Parameters do not take effect after provisioning using plain XML content
• Changing the timer interval from 24h-random to a fix time stops the regular check
• Text on Info Services settings page is missing

Software 42.078, June 2013

Bug-fixes and improvements:

• Access code special treatment in call-list for Nordic customer
  
  The feature is by default disabled (not available in the WEBUI) It can be enabled via provisioning. Values which has to be adapted:

  Config Byte: 
  
  BS_CUSTOM.ucAkzVoipNotUsedNumberLength.

  Values:

  • 0x00 – feature available in WebUI but not working
  • 0x01-0x09 – feature available in WebUI and working for numbers n-digits long and shorter
  • 0xFF – feature disabled (not available in webUI) – the default one

  Other values are not allowed

Software 42.076, January 2013

Bug-fixes and improvements:

Gigaset PBX Manager supported by PRO handsets (SL610H PRO, S510H PRO). Feature control via handset menu:

• Identity management / Hot Desking
• Calls lists
  • missed
  • incoming
  • outgoing
• DND
• Selection of CLIP number to be shown
• Group call settings
• Call divert
• Visual Voicemail
• Selective phone-book search for all available directories (also LDAP)

Enhancements:

• Teles Interoperability: various improvements
• New Firmware/Profile Update: Do not alert user by MWI notification light any more for N510 IP PRO, N300 (A) IP

BugFixes:

• tiPicall SoftSwitch interoperability: MWI for Voice Mail working again
• SMS: Problem with concatenation solved
• Broadsoft: Problem fixed with download of .xml file from server when digest username/password authentication is used