Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Software 2.44 Jan 2022paneltitleColorSoftware 2.42 Sept 2021titlepaneltitleColor September 2020paneltitlepaneltitle, panel, paneltitle, paneltitleColor, July 2019paneltitle, paneltitle,
Table Filter
inversefalse,false,false,false,false
ddSeparator‚‚
sparkNameSparkline
columnN610,N670,N870
hidePaneTable header
isNewfalse
separatorPoint (.)
labelsN610‚N670‚N870‚Filter whole table‚Hide columns
default,,,,
ddOperator,,
cell-width150,150,150,150,150
hideColumnstrue
datepatternyy-mm-dd
globalFiltertrue
id1684834495820
isORAND
formatVersion2
order2,3,4,1,0
Software 2.57 - January 2024N610N670N870Integrator

New hardware support

YesYesYes-

Automatic online firmware update via web-interface with link to release notes

YesYesYes-

R700H protect support

YesYesYesYes

Length of internal numbers when using access and area codes

YesYesYesYes

DNS SRV: Failover/Fallback improvements

YesYesYesYes

Upgrade open SSL from version 1.1.1 to version 3.0

YesYesYesYes

EPOS/Sennheiser GAP Headsets do not honor Basic-Service=Basic-Speech, after register this DECT headset direct to our DECT system, there is no audio

YesYesYesYes

N670 mini multicell needs to be upgraded with upgrade to N870 feature level license.  Show the MAC-ID in the N670 mini multicell DECT base web-interface (https://<IP_Addr>/dlsd-stats). This simplifies the ordering of the licenses for all N670 devices as the MAC-ID is required to order the license.

-Yes--

Syslog and user change time stamp should contain year by default

YesYesYesYes

N610: XML file for repeater, only MAC in lower case is accepted. Upper case and lower case should be supported

Yes---

After DECT system software update, refresh the Handset DECT (PNCAP) functionality

YesYesYesYes

GAP handset support via setting is not valid anymore, GAP handsets are supported by default

YesYesYesYes

Multiple PBX Redundancy by Moved permanently or temporarily

YesYesYesYes

Central Phonebook






Enabled again for Virtual Integrator (Not possible using Embedded Integrator)

---Yes


Network access closed when not used (Security improvement)

YesYesYesYes


Refresh now button in web interface

YesYesYesYes


Add "search anywhere in name" option in web interface

YesYesYesYes

Web interface






Show reason why Upload license file failed

YesYesYesYes


Base station export drop-down box supports: XML/CSV

YesYesYesYes


Embedded Integrator reset option via web-interface offers more roles

---Yes


CNIPoverLookup enable/disable

YesYesYesYes

For improved interoperability and robustness, ptp operation of V2.57.0 is back to two-step clock synchronisation.

-YesYesYes

Webgui is unusable after "wrong password" in SIP account

YesYesYesYes

Autolookup in Broadsoft XSI phonebooks: Number is not replaced with the contact name

YesYesYesYes

Broadsoft N-Way conference: Adding conference participants is not possible when access code is used

YesYesYesYes

SIP registration improvements

YesYesYesYes

Access code "0" / "Always", redial is not working correctly

YesYesYesYes

After a time all handsets reply with "Busy Here" to incoming calls

YesYesYesYes

CLIP/COLP option does not show numbers starting with +

YesYesYesYes
Software 2.54 - July 2023N610N670N870Integrator

Download of DECT measurements files via the web-interface

YesYesYesYes

First implementation of Virtual Integrator Hyper-V support, contact your Gigaset technical sales if you want to use this

-YesYesYes

LDAP Filter improvement

YesYesYesYes

Default production certificate expired

YesYesYesYes

N-Way conference is possible when Internal telephony is enabled

YesYes--

Internal telephony: Broadsoft XSI Authentication using SIP credentials from SIP account

YesYes--

DNS-SRV failover/fallback improvements

YesYesYesYes

CNIPoverLookup improvement, do lookup if CNIP contains number only

YesYesYesYes

If handset import has an error, it should be more descriptive

YesYesYesYes

Polish language update

YesYesYesYes

Sporadic calls are not delivered to the handset

YesYesYesYes

Inband DTMF over G722 doesn't work

YesYesYesYes

Process terminated when dialed the code for call forwarding

YesYesYesYes

No ringback tone in case of internal call originated from CTI

YesYesYesYes
Software 2.53 - May 2023N610N670N870Integrator

DECT security step B

YesYesYesYes

New DECT measurement procedure

YesYesYesYes

R700H SPK PRO handset (Calibrated R700H PRO) is supported

YesYesYesYes

DNS-SRV failover/fallback improvements

YesYesYesYes

Internal Telephony: Broadsoft phonebook, XSI Authentication using SIP credentials

YesYes--

Provisioning

YesYesYesYes


Web-interface: Show warning when errors in provisioning file

YesYesYesYes


Http digest username and password via redirect server

YesYesYesYes


Internal Telephony: Not give an error message if the handset is not available

YesYes--

AML / MQTT

-YesYesYes


Make error handling more descriptive for AML Message

-YesYesYes


Notify server that the handset is in/out of charger

-YesYesYes

Web-interface

YesYesYesYes


Support for Polish language

YesYesYesYes


UDP NAT refresh timer 

YesYesYesYes

New access code option "Manual dialing"

YesYesYesYes

Microsoft Teams: Start provisioning via web-interface

YesYesYesYes

Configure Registration Window DM specific

--YesYes

Diversion header in SIP INVITE is supported

YesYesYesYes

Security: Mediasec improvement

YesYesYesYes

Openstage M3 handset can not start an Alarm call

YesYesYesYes

Incorrect license status for N670 license upload on licensing page

-Yes--

wrong license after save/restore config on N670 with upgrade

-Yes--

Provisioning: set_hs_aml not working with capital letters

YesYesYesYes

DM Call limit problem

--YesYes

If display name of the caller contains the char “ and <, they are not displayed on receiver device

YesYesYesYes

Autolookup in XSI phonebooks is not working properly when caller ID source is PAI

YesYesYesYes

Failover period active after upload license for VI

---Yes

Continued audio after hang-up for some time

YesYesYesYes

SRTP Audio stops after 15min

YesYesYesYes
Software 2.52 - February 2023N610N670N870Integrator
Internal telephony roleYesYes--

Auto-provisioning SIP accounts and handset assignmentYesYes--

Hide SIP account admin pageYesYes--

Access code: Internal/emergency numbers handling

YesYesYesYes

Delay firmware upgrade/downgrade if there is an active call

YesYesYesYes

DECT manager redundancy

--YesYes

Microsoft Teams supported

YesYesYesYes

Broadsoft N-way conference

YesYesYesYes

Licence can be updated via online process

-YesYesYes

Nx70 online access to license server-YesYesYes

Automatic licence update every 24 hours-YesYesYes

Show date/time of last connection to license server-YesYesYes

Licence Refresh button-YesYesYes
Licence:--YesYes

'Please activate licence' after restore settings with an active licence to another VI--YesYes

Failover Period Active is shown in web-interface--YesYes
Alarming, Messaging and Location-YesYesYes

Messaging and/or Location license can be activated/deactivated via the web-interface-YesYesYes

Messaging and/or location license is visual in the handset overview via an icon-YesYesYes

BLE via MQTT within 20 seconds sends cached values-YesYesYes

timeout in aml message status fullview_by_user_interact-YesYesYes

Notification about DECT base and DECT manager status-YesYesYes
Extend CLIP/COLP possibilities with PAI(tel)YesYesYesYes

FROMYesYesYesYes

PPI + FROMYesYesYesYes

PAI(sip )+ PPI + FROMYesYesYesYes

PAI(tel) + PPI + FROMYesYesYesYes

PAI(tel) + FROM + PAI(sip)YesYesYesYes

Syslog: TLS protocol can be configured via web-interface and not only via auto-provisioning

YesYesYesYes

DECT registration window

YesYesYesYes

Close the DECT registration window on all DMs, if not handset open "to-register".
Application Note: If you want to keep registration window open for bulk re-registration, create an additional dummy handset open in "to-register", that will not re-register!
YesYesYesYes
Support: log information about changes made by de user/provisioning in the one-button diagnostic fileYesYesYesYes

Consultation-Softkey (to put call on hold and start consultation call) should not disappear in passive hold

YesYesYesYes

Central Phonebook

YesYesYesYes

Do not show empty entriesYesYesYesYes

Download via httpsYesYesYesYes

Security: Disable unsecure TLS1.1

YesYesYesYes

CNIP with special characters is displayed incorrectly on consultation call display

YesYesYesYes

Provisioning:

YesYesYesYes

Templates with more handsets then supported should not give errorYesYesYesYes

Encrypted provisioning file supportYesYesYesYes

Web-interface: Status of last Automatic backup

YesYesYesYes

CCBS - Ringback via 486 Busy like in N720

YesYesYesYes

SIP re-registration expected at ..% of expire timer

YesYesYesYes

Reboot via SIP NOTIFY Event: check-sync;reboot=true

YesYesYesYes

Option for priority of SIP name over net/central-dir-autolookup

YesYesYesYes

***922 test tone gone after handover

-YesYesYes

CCBS and CCNR should by config-option be made available for SIP servers indicating ccbs/ccnr support by different measures

YesYesYesYes

TTL time can be adjusted to 128

YesYesYesYes

Send DTMF tone during call waiting signaling

YesYesYesYes

Name in XSI phonebook is not displayed properly in incoming calls

YesYesYesYes

SIP account does not register after employee change

YesYesYesYes

N870 behind IBERNEX "nurse call" system - CLIP/CNIP is not displayed in incoming calls, "External" instead

-YesYesYes

DNS SRV/A queries - TTL not applied

YesYesYesYes

Busy display - removing useless softkey "Options" as it does nothing at "Busy" display

YesYesYesYes

If Registrar/Proxy is given by FQDN, Failover-Server function does not work

YesYesYesYes

Sporadic no audio when using TLS and SRTP in a multicell environment

-YesYesYes

LAN synchronisation: ptp reload and so asynchrony triggered by too sensitive check for DHCP changes

-YesYesYes

N670 auto-answer call info after=0, also if Call Manager set to NO!

YesYesYesYes

RFC2833 DTMF doesn't work

YesYesYesYes

After some weeks stop sip registration

YesYesYesYes

Enabling/Disabling VLAN via provisioning makes the LAN interface go down

YesYesYesYes

RPID info in UPDATE is not displayed on handset after attended transfer

YesYesYesYes

INVITE with replaces header is not answered with 200OK 

YesYesYesYes
LDAPYesYesYesYes

LDAP client is not able to properly close the session when there are some errors during parsing of the LDAP filters configured for LDAP requestsYesYesYesYes

Validate syntax for filtersYesYesYesYes
Software 2.49.1 - September 2022N610N670N870

Access code dialing not for short (internal) numbers with exception of emergency numbers

-YesYes
Software 2.48 - June 2022N610N670N870
Show in syslog when license is applied for wrong master DM--Yes
Device doesn't send REGISTER after provisioning when TCP is used-YesYes
Unexpected change of license status from "License activated" to "Failover period active" after changing SIP provider settings and reboot.-YesYes
Software 2.47 - June 2022N610N670N870

Add new MQTT connection Method

-YesYes

Introduce sip.instance and reg-id according to rfc5626

-YesYes

Broadsoft XSI phonebooks, lookup in multiple XSI phonebooks:

-YesYes

Update PJSIP library to version 2.11.1

-YesYes
Messaging:-YesYes

Improve performance of deleting messages in msg-service via delMsg procedure

-YesYes

Blue color AML texts and icons support-YesYes
TLS 1.3 support-YesYes
Warn about SIP messages too long for UDP transport-YesYes
Show longer internal names on R700H / S700H / SL800H handsets-YesYes

Create web page for automatic backup

-YesYes

Fallback from failover honoring a penalty time

-YesYes

AML inventory/status report: base stations and DECT managers - connectivity and synchronization

-YesYes

Show in the UI and Logs reason for not registering SIP

-YesYes

Loses the SIP registration until the next restart

-YesYes

Some mobile devices are no longer registered after a network down

-YesYes

Registration after receive 503 with Retry-After

-YesYes

N870 with V2.44 - VI licenses no longer work

-YesYes

Minor memory leak when performing LDAP tests

-YesYes

Failed registration retry timer not respected due to SIP registration monitoring

-YesYes

MWI after "Call completed elsewhere"

-YesYes

Phonebook Italian translation for "Refine"

-YesYes

DTMF not work if 103 telephone-event/48000 is send in "INVITE"

-YesYes

Sporadically restart

-YesYes

Trying and Ringing send with codec mismatch

-YesYes

License:

-YesYes

Missing MAC address of Master DM in MAC-ID and not possible to upload license file for Master DM

--Yes

Invalid license status: Activation Period -1 d for some variants--Yes
Messaging:-YesYes

Second paragraph in message is not displayed in detailed view-YesYes

Title not displaying in detailed view-YesYes
LDAP-YesYes

Incorrect search request and sporadic giga-ip-bs crash during specific LDAP search-YesYes

  • Heal TLS LDAP session pending too long
-YesYes
Software 2.44 - Jan 2022
N610N670N870
Panel
titleColor#F85404
titleBGColor#F0F0F0
title

Automatic back-up to an SFTP server

-YesYes
AML
-YesYes

Per default one Messaging and Location License is enabled

-YesYes

Show AML licenses on License page

-YesYes

Message Melody Names are still missing translation in handset UI-YesYes

Application server, secure connection

using certificates

using certificates

-YesYes

User settings like silencing can be overruled via MQTT

-YesYes

Vibration can be activated via MQTT

-YesYes

Message ringtone volume can be set via MQTT

-YesYes

Text with line break can be send

-YesYes

Option to allow user to delete the message can be set to yes or no via MQTT

-YesYes

Reply options changed from 3 to 10

-YesYes

Auto-provisioning: Set TTL value for IPv4 for INT-DM roles

-YesYes

Auto-provisioning: NTP server via DHCP option 42

-YesYes

Auto-provisioning: DNS option 6 DNS server

-YesYes

Central phonebook:

-YesYes

Search anywhere in name can be configured-YesYes

Sort on first name / last name or Last name / first
name
name-YesYes

The handset can not connect for a short period, show "No base"

-YesYes

Web UI: DECT Settings - add DECT radio band selection for SEA/Taiwan

-YesYes

SUOTA pull

-YesYes

Download of FW file is not possible if the MAC is checked

-YesYes

Disable central phonebook for large installations

--Yes

License: Web-interface: Remove "Create Request File"

-YesYes

Fix registration problems with >1 Contact headers

-YesYes

Add support for SIP-OPTIONS sent during INVITE dialog

-YesYes

ptime value is not sent in outgoing calls

-YesYes

System restarts, sporadic giga-ip-bs termination

-YesYes

DECT system loses registration on

PBX after approx. 3 months

PBX after approx. 3 months

-YesYes

Sporadically restart 

-YesYes

LDAP improvements

-YesYes
  • N670 restart sporadically
  • LDAP improvements

    In dialog Re-Invite is not answered with all codecs in SDP

    -YesYes

    Calls can't be set up from time to time (603 decline)

    -YesYes

    uaCSTA Registration refresh timer

    -YesYes

    uaCSTA Clear Connection in calling state

    -YesYes

    uaCSTA incoming call ringing end call by caller

    -YesYes

    XML phonebook: HS displays "empty line"

    -
    Yes
    #F85404
    titleBGColor#F0F0F0
    Yes

    Software 2.44 - Jan 2022

    N610N670N870
    title

    Alarming, messaging and location 

    -YesYes

    SIP messaging

    -YesYes

    Messaging and location license

    -YesYes

    NAT refresh timer

    -YesYes

    TLS 1.3 first implementation for provisioning / LDAPS / MQTT

    -YesYes

    Central phonebook search anywhere in name via

    provisioning 

    provisioning  "CentralBook.0.SearchAnywhereInName"

    -YesYes

    Russian/Dutch translations

    -YesYes

    Provide feedback when DM statistics are not available

    -YesYes

    DST Root CA X3 certificate expires in less than 180 days (2021-09-30)

    -YesYes

    Improve syslog to show why license was rejected

    -YesYes

    Re-invite is not answered with all codecs in SDP

    -YesYes

    Statistics not retrieved - Operation Failed and other WEB UI pages not shown

    -YesYes

    Provisioning using "@" sign blocks adding DECT

    base 

    base "System limit has been exceeded."

    -YesYes

    Splash ring: wrong soft keys are shown after answer the call

    -YesYes

    Web-interface, system is shown as "small" instead of "medium"

    -YesYes

    Incorrect display in the statistics"Operation failed”

    -YesYes

    Statistics Reset all doesn't include LAN counters

    -YesYes

    After update with expansion to 20 providers, 1 missing 19 shown.

    -YesYes

    System reboots when trying to access LDAP contacts

    -YesYes

    Crash after incoming calls from certain mobile phone provider

    -YesYes

    Dropped calls giga-ip-bs terminated

    -YesYes

    Base Restarts when wants to hear VoiceMail

    -YesYes

    Performance problem with BS synchronisation page

    -YesYes

    DECT not responsive after Network voice mail pressed simultaneously from 2 DECT devices

    Panel
    -YesYes
    titleColor#F85404
    titleBGColor#F0F0F0

    Software 2.39 - March 2021N610N670N870

    Implementation of 'mediasec' support

    -YesYes

    N670 Mini-multicell solution

    -Yes-

    N670 with N670 UPGRADE TO N870 FEATURE LEVEL license can be used as DECT Base in N870 multicell system

    -Yes-

    Provisioning of network settings

    -YesYes

    gigaset-config.com is supported

    -YesYes

    uaCSTA improvements

    -YesYes

    Tone scheme "Greece" can be selected

    -YesYes

    Delete handset does not work when capital letters are used for IPUI

    -YesYes

    Use xHTML phonebook for call transfer > works not with the prov xHTML phonebook Key

    -YesYes

    Blind-transfer can be disabled

    -YesYes

    Change system from Small to Medium then error message is

    shown

    shown

    -YesYes

    Firmware update via 2-way SSL fails

    -YesYes

    Wrong MWI indication caused by platform NOTIFY broadcasts

    -YesYes

    CNIP with special characters doesn't display correctly

    -YesYes

    Outgoing call with letters in SIP from user part is not stored

    -YesYes

    CNIP is not displayed on HS if it contains "@" character

    -YesYes

    XSI phonebook list 211 "Too many entries found" but works

    -YesYes

    Empty header for entry view in Personal and Group Common directories

    -YesYes

    Incoming call with letters in SIP From user part is not stored with URI to call back

    -YesYes

    When SRTP used, after 90 days no audio

    -YesYes

    XSI phonebook, can not answer call due to bad/slow network connection

    -
    title
    Yes
    #F85404
    titleBGColor#F0F0F0
    Yes

    Software 2.36

    - September 2020

    N610N670N870

    SIP account for provisioning

    --Yes

    LAN statistics DECT base via new DECT base web-interface

    -YesYes

    Increase number of SIP providers from 10 to 20

    -YesYes

     Auto-provisioning

    : Improve delete handsets

    -YesYes

    Update PJSIP library to version 2.10

    -YesYes

    CLI-config: system applications / services should consume DHCP options only if requested

    -YesYes

    XML number filter visible in web-interface by default

    -YesYes

    uaCSTA normalClearing not send when other side disconnects call

    -YesYes

    Enable hiding passwords for SIP all Accounts

    -YesYes

    Feature key synchronization can also be used by non Broadsoft platforms

    -YesYes

    No name displayed when number is anonymous

    -YesYes

    Turn LED signalling on/off via the web

    -interface

    -interface

    -YesYes

    Add popup to reboot system after importing DECT handsets

    -YesYes

    Make syslog easily configurable

    -YesYes

    Web UI - Licensing - Activation period status message

    -YesYes

    Dm ID can be set via provisioning

    --Yes

    PJSIP stops sending REGISTER by TCP after reboot of PBX

    -YesYes

    sip-control terminated.

    -YesYes

    Switch from UDP to TCP and back then no SIP registration anymore

    -YesYes

    Network name replacement does not work in Jumbo mode

    -YesYes

    Lack of syslog info about mobile device import fail

    -YesYes

    LDAP stops working

    -YesYes

    Reset of VI with keep IP option resets to dynamic IP instead

    --Yes

    No information about anonymous call is displayed in

    jumbo mode

    jumbo mode

    -YesYes

    SIP re-register stops when platform is unavailable "Not enough memory" message is seen

    -YesYes

    Graphical tool does not show signal info to base station with equal or higher sync level

    -YesYes

    Capacity of DM's is not summarized correctly by web-ui

    -YesYes

    No LAN synchronization possible for medium deployment if DM is LAN Master

    --Yes

    [Online directories][XML] Escaped characters and numeric character entities are not recognized

    -
    titleColor#F85404
    titleBGColor#F0F0F0
    YesYes

    Software 2.33 - June 2020

    N610N670N870

    Install DECT base in different subnet

    -YesYes

    Virtual Integrator: Licensing of up to 100 N870 and 300 Single Cell DM's (N670) is possible

    --Yes

    Embedded Integrator: Licensing of up to 4 N870 and 20 Single Cell DM's (N670) is possible

    --Yes

    N670 upgrade to N670 multicell

    -Yes-

    N870 up to 10 base-stations (Small), number of maximum parallel calls increased from 10 →

    20

    20

    --Yes

    Web-interface HTTP access is disabled, redirected to HTTPS only

    -YesYes

    Role change via hardware key is made more simple including LED signaling

    -YesYes

    Show in web-interface if DECT base firmware update is running

    -YesYes

    One button Diagnostics download

    -YesYes

    WebUI becomes inaccessible (No connections..., please wait...) when enabling TLS

    -YesYes

    T1 timer minimum value increased to 100 ms

     Provisioning

    -YesYes

    Provisioning

    -YesYes


    Sending Empty or wrong value DECT Radio band caused DECT radio to be disabled

    -YesYes


    Improve auto provisioning speed from 63 seconds to 13 seconds

    -YesYes


    Provision certificates and device settings in one provisioning job

    -YesYes


    Hide web-pages

    -YesYes


    Time span when the device checks for provisioning updates needs to be

    configurable

    configurable

    -YesYes

    Client certificate not added in case of 2-way SSL. 

    -YesYes

    XML online directory - Results not visualized in case of more than 99 entries

    -YesYes

    N670/N870 Central Phone-book: Not able to search for special characters

    -YesYes

    xHTML

    -YesYes


    use xHTML phone-book for call transfer

    -YesYes

    Password is limited to 9 characters-YesYes
    Device does not send DHCP release when rebooting, can be enabled by
     
    CLI
     
    or variant.-YesYes
    Central phone-book-YesYes

    Delete via web-interface is now possible.-YesYes

    When first line is empty, phone-book does not work-YesYes

    One user-agent behind integrator

    --Yes
    Web-interface
    :
    :-YesYes

    Removed not functional phone systems-YesYes

    Hide web-pages

    -YesYes
    SIP control terminated fixed-YesYes
    NOTIFY with a tag in header "To" causes "500 Unhandled by dialog usages"-YesYes
    When '#' is added to numbers it is displayed on HS as '%23'
    -
    titleColor#F85404
    titleBGColor#F0F0F0
    YesYes
    Software 2.29.1
    - March 2020N610N670N870

    DECT base level 1 redundancy

    -YesYes

    LAN sync statistics in base station statistics 

    -YesYes

    RTCP support

    -YesYes

    SIP compact headers are supported

    -YesYes

    For service fade-out option, Block new

    calls

    calls

    -YesYes

    Web-interface is blocked for 10

    minutes after

    minutes after 3 wrong login attempts

    -YesYes

    Supported web-interface languages:

     English

    English /

     German

    German / French / Spanish / Dutch / Italian / Portuguese / Turkish / Russian / Czech / Polish / Slovenian / Greek

    -YesYes

    N870 all-in-one with no extra DECT base can now handle 8 parallel calls instead of 5

    -YesYes

    Improve SIP via TCP socket handling

    -YesYes

    RTP-port range per DECT base changed from

    400 → 240

    400 → 240

    -YesYes

    RTP-port range for 60 DECT base stations changed from

    24000 →

    24000 → 14400

    -YesYes

    Auto-provisioning:

    -YesYes

    Add provisioning parameter: Maximum search results central phone-book

    -YesYes

    No Error is displayed in web-interface when firmware update is empty or not needed-YesYes

    Outbound proxy with leading space not resolved

    by DNS

    by DNS

    -YesYes

    Improved performance adding handsets and SIP accounts-YesYes
    Zombie handsets: show now more customer friendly message: "Please register!" -YesYes
    No missed calls when call waiting is disabled-YesYes
    xHTML white-space trailing before "&" sign-YesYes
    Turkish characters not displayed correct at some DECT handsets-YesYes
    Cyrillic characters not displayed during Pickup notification-YesYes
    Access Code not applied in case of option - From network directory-YesYes
    Room monitor call not possible-YesYes
    Translation improvements-YesYes

    E.164 support

    -YesYes
    Failed registration retry timer is not respected when SIP proxy is set-YesYes
    Distinctive ring
    :
    :-YesYes

    Empty header is supported-YesYes

    Re-register handsets to display all ringtones-YesYes
    Delete/change important settings, protected via username and password.-YesYes

    Delete one or more DECT handsets.-YesYes

    Admin password-YesYes

    User password-YesYes

    CLI password-YesYes

    Web security certificate-YesYes

    Reset device/role change
    title
    -
    titleColor#F85404
    titleBGColor#F0F0F0
    YesYes
    Software 2.26.0
     - December 2019N610N670N870
    Supported Languages: German / English / Spanish / French / Italian / Russian / Turkish / Netherlands
    / Portuguese
    / Portuguese-YesYes

    Save of Central phone-book is now possible

    -YesYes

    Distinctive ringing for internal, external, door station, group, emergency or user defined call types

    -YesYes

    Add capacity information to http (GET) user-agent header

    -YesYes

    Large and XXL systems are now released

    --Yes

    N870 in Integrator mode only:

    --Yes


    Up to 4 DECT Managers (With license)

    --Yes


    Up to 800 DECT handsets

    --Yes

    N870 Virtual Integrator is released

    --Yes


    Up to 100 DECT Managers (With license)

    --Yes


    Up to 20000 DECT handsets

    --Yes

    DECT GAP handsets protection can be disabled

    -YesYes

    Improved DECT handset registration, up to 10 registrations in parallel can be done.

    -YesYes

    NAPTR

    -YesYes

    CSTA

    -YesYes


    CSTA session already active

    -YesYes


    CSTA transport protocol can be changed via the web-interface

    -YesYes


    SnapshotDeviceResponse answer is wrong

    -YesYes


    Switch the transport protocol without an reboot

    -YesYes


    Device reboots when using uaCSTA and receiving

    2e 

    2e incoming call

    -YesYes

    CNIP not updated on Transferee after transfer

    -YesYes

    Central phone-book

    -YesYes


    Can be downloaded via the web-interface

    -YesYes


    INT key can be assigned to Central phone-book

    -YesYes


    After provisioning phone-book is automatically

    downloaded

    downloaded

    -YesYes

    Web-interface:

    -YesYes


    Show Licensing page when used as Integrator only

    -YesYes


    Configure SIP registration behavior if mobile device is not connected/reachable

    -YesYes
    Caller-Id not updated after call transfer at OpenScape Business-YesYes
    Fix for CNIP with Cyrillic characters not displayed on DECT phone-YesYes
    HTTPS for Rap - fixes for nested absolute links-YesYes
    Get handset information via HTTP(s) get-YesYes
    Fail-over to secondary SBC (sip proxy)-YesYes
    Register request with Authorization Digest: QOP = "auth-int" or "auth-init"-YesYes
    Display handset during call transfer is very slow -YesYes
    xHTML
    :
    -YesYes

    Incoming invite with auto-answer is
    not possible
    not possible-YesYes

    Service doesn't work when credentials are empty-YesYes

    "&" Sign gives error message-YesYes
    Syslog-YesYes

    Add information if setting is changed-YesYes

    Add LDAP information-YesYes
    No CLIP update-YesYes
    LDAP detail view doesn't work on some entries-YesYes
    Auto-provisioning-YesYes

    Parameter "Provisioning.global.Period" should work without restart-YesYes

    Default ringtone can be changed via provisioning-YesYes

    Provisioning started via web-interface showed failed message but worked fine-YesYes
    Maximum length of REFER-TO
    header increased
    header increased-YesYes
    Access code From incoming calls and from network together with Area code is not working-YesYes
    DTMF: No CRLF after the "Duration" line
    -
    titleColor#F85404
    titleBGColor#F0F0F0
    YesYes
    Software 2.23.0
    - September 2019
    N610N670N870
    Bug-fixes and improvements:

    3 party conference-YesYes

    DE-REGISTER SIP account when handset is switched of or out of range

    -YesYes
    DHCP option 66 (HTTP(s) provisioning URL)-YesYes
    DECT sync levels increased from 10 to 15-YesYes
    DHCP option 51 and 125-YesYes
    Auto-provisioning:-YesYes

    Parameters without IPUI, like: <param name="SipAccount..AuthName" value="" /> are ignored to speed-up provisioning when sending full provisioning templates with many empty handsets

    -YesYes

    UpdateDectManager procedure can cause that DECT manager can't connect to Integrator--Yes

    Error message should not be shown due to errors in wrong configured parameters as other parameters are accepted-YesYes

    Direct link to provisioning file with extension.cfg via redirect is now possible-YesYes

    User-agent in HTTP get contains information about Maximum number of handsets allowed-YesYes

    Status-page: Direct links to the configuration pages-YesYes

    Mobile devices - administration: New icon in DECT column
    Image Removed when
     when handset is switched off or out of range (signalling out of range can take up to 3 hours)-YesYes

    After changing number of active base stations, Web-interface returns to base station synchronisation list-YesYes

    TCP/TLS port SIP destination port 10060 not working. -YesYes
    Broadsoft-YesYes

    Improvement for DND, Call Forward Always, Busy and no Answer-YesYes

    Call Forward is splitted from one handset menu to 3 menu items-YesYes

    XSI phonebook, reverse lookup is now done based on the
    exact number
    exact number-YesYes
    Central phonebook-YesYes

    Special characters not displayed correct-YesYes

    URL length increased to 254 characters-YesYes
    3CX
    -YesYes

    Call transfer improvement.-YesYes

    CNIP update improvement.-YesYes
    LDAP(S) improvements-YesYes
    Improved overview if the DECT registration window is open or close-YesYes
    DNS failover improvement-YesYes
    Add factory reset option / role change when device is Manager + Base-YesYes
    N670 can be added to the Virtual Integrator-Yes-
    LDAP/XML/XSI phonebooks can be used
    during call transfer
    during call transfer-YesYes
    Anonymous calls are not saved in Call Lists-YesYes
    NTP too low threshold for Root Dispersion.-YesYes
    xHTML "&" sign should not generate error-YesYes
    Reboot when ringing HS is switches off-YesYes
    uaCSTA, SnapshotDeviceResponse answer is wrong-YesYes
    Switching from SRTP to RTP during 1 call -YesYes
    MWI counter update improvement-YesYes
    Crashed, when sip-user-id is longer that 19 characters (or
    uninitialised
    uninitialized)-YesYes
    First improvements to support NAPTR is implemented. (Official supported in Next release)
    -
    title
    Yes
    #F85404
    titleBGColor#F0F0F0
    Yes
    Software 2.20
    .0 - July 2019N610N670N870
    Bug-fixes and improvements:

    SIP options in SIP register header-YesYes
    Ghost handsets show display message to "Reset or to Register"-YesYes
    Updated German translations-YesYes
    Improvements for large systems--Yes
    Improvements for LAN sync
    -
    titleColor#F85404
    titleBGColor#F0F0F0
    YesYes
    Software 2.17
    - June 2019
    Bug-fixes and improvements:
    N610N670N870
    Use Phonebook key to assign to xHTML service-YesYes

    Phonebook lookup caching time

    -YesYes
    Performance enhancements for high load and
    large systems
    large systems--Yes
    Firmware update via HTTPS using client certificates-YesYes
    LAN synchronisation to better deal with weak jitter-YesYes
    Security improvement-YesYes
    LDAP username does not allow "=" character-YesYes
    Call logs that have "-" character inside the CLIP
    -
    titleColor#F85404
    titleBGColor#F0F0F0
    YesYes
    Software 2.16.2
    - April 2019
    N610N670N870
    Bug-fixes and improvements:

    Status page, DECT base if it has "No sync" status will be visible.-YesYes

    N870 new role, Integrator only. With one external DECT manager.

    --Yes
    Firmware update using HTTPS client certificates.-YesYes

    Auto provisioning using fixed

    numbering

    numbering.

    -YesYes
    .

    Central phonebook

    -YesYes

    Added new PKI Root Certificates

    -YesYes

    Handset export/import improvement.

    -YesYes

    SIP control termination fixed.

    -YesYes

    Provisioning: IPUI using capital letters.

    -YesYes

    Add time stamp to Incident.tar file.

    -YesYes

    CNIP string should utilize all available space on the display.

    -YesYes

    LDAP improvements.

    -YesYes

    Provisioning Improvements

    -YesYes

    Stability improvements

    -YesYes

    User-

    agent for

    agent for software

    download matches

    download matches the SIP user-agent

    -YesYes