| Software 2.62.1 - May 2025 | N610 | N670 | N870 | Integrator |
|---|
Register DECT handset via hardware key | Yes | - | - | - |
De-register handsets via connected handset | Yes | - | - | - |
Line assignment via handsets | Yes | - | - | - |
Client certificates show on security page including Details button | Yes | Yes | Yes | Yes |
DECT handset bulk editor | Yes | Yes | Yes | Yes |
R700H/S700H function key short or long press send via MQTT to server | - | Yes | Yes | Yes |
TR-069 is implemented (Available on Request) | Yes | Yes | Yes | Yes |
Multiple named accounts | - | Yes | Yes | Yes |
N610: 8 DECT handsets/SIP accounts → 20 DECT handsets/SIP accounts | Yes | - | - | - |
Broadsoft Fail-over/Fallback | Yes | Yes | Yes | Yes |
DECT handsets, Firmware column (Full SW string, Sorting, Searching) | Yes | Yes | Yes | Yes |
MQTT Response when Alarm cannot reach handset | - | Yes | Yes | Yes |
N610/N670: Enable internal telephony via provisioning | Yes | Yes | - | - |
Add possibility to select Sip account name source on handset display (in localPBX enabled systems) | Yes | Yes | - | - |
AML: Handsets in alarm group not receiving message when a HS is not registered on DECT | - | Yes | Yes | Yes |
SIP Account for provisioning does not trigger any events when receiving check sync | - | - | - | Yes |
No registration fail-over if 503 has Retry-After | Yes | Yes | Yes | Yes |
3CX call-waiting | Yes | Yes | Yes | Yes |
| Software 2.61.2 - February 2025 | N610 | N670 | N870 | Integrator |
|---|
SIP control terminated fix | Yes | Yes | Yes | Yes |
Synchronization mode is set from LAN to DECT for a short time when dlsd reports aysnc | - | Yes | Yes | Yes |
| Software 2.61.0 - November 2024 | N610 | N670 | N870 | Integrator |
|---|
New, secure client certificate (provisioning) | Yes | Yes | Yes | Yes |
When the first time installing an Virtual integrator you need to enter an Activation code | - | - | - | Yes |
Calls with URI are not properly stored as missed and outgoing calls | Yes | Yes | Yes | Yes |
N610 Int. Tel.: Provisioning pop up not OK | Yes | - | - | - |
Additional hold option | Yes | Yes | Yes | Yes |
GAP handset: play (immediately) "ready to dial" tone after off-hook for outgoing call | Yes | Yes | Yes | Yes |
[Broadsoft] Invite Failover, Failback, Bye Failover. | Yes | Yes | Yes | Yes |
Loss of SIP connections, loss of calls - sip-control terminated | Yes | Yes | Yes | Yes |
DTMF RFC2833 - Wrong Payload Type when the codec list is duplicated | Yes | Yes | Yes | Yes |
After power outage system becomes unusable | Yes | Yes | Yes | - |
No reverse lookup done for transfered calls (IVR, Huntgroup etc.) | Yes | Yes | Yes | Yes |
<param name="AreaCodes.0.Wildcarding" value="1" /> not working | Yes | Yes | Yes | Yes |
| Software 2.59 - July 2024 | N610 | N670 | N870 | Integrator |
|---|
| Bintec-elmeg DECT 210 systems can be extended with Gigaset N870 devices | - | - | Yes | - |
| Bintec-elmeg DECT 160 systems can be extended with Gigaset N670 devices | - | Yes | - | - |
Bintec-elmeg DECT 210 and DECT 160 system can be extended with Gigaset PRO handsets: R700H / S700H / SL800H / R700H Protect | - | Yes | Yes | - |
Secure Firmware update with client certificates will use the existing SHA1 factory client certificate, this was disabled in software 2.57 | Yes | Yes | Yes | Yes |
Codec g729 - Info about Annex B | Yes | Yes | Yes | Yes |
Registration lost after SBC maintenance | Yes | Yes | Yes | Yes |
Web-interface: Display diversion header option on/off | Yes | Yes | Yes | Yes |
Remove unsecure WEB-UI Cipher Suites | Yes | Yes | Yes | Yes |
LDAP Provisioning Parameter: remove "ObjectClass" | Yes | Yes | Yes | Yes |
Configure scheduled reboots via provisioning | Yes | Yes | Yes | Yes |
Automatic firmware update | Yes | Yes | Yes | - |
Disable Web UI by provisioning without need for reboot | Yes | Yes | Yes | Yes |
DECT manager restarts on 'Anonymous' call - sip-control terminated !! | Yes | Yes | Yes | Yes |
No audio during calls - "Could not find MediaIdx" error | Yes | Yes | Yes | Yes |
Not able to make calls | Yes | Yes | Yes | Yes |
No reverse lookup in handset phone-book when Diversion header present | Yes | Yes | Yes | Yes |
Virtual integrators send packets to the (Unknown) IP address: 192.168.143.1 | - | - | - | Yes |
When 1 of the TrunkName parameter in oper is empty, no trunks are created at all | Yes | Yes | - | - |
MQTT bsStatus response, does not contain the name | - | Yes | Yes | Yes |
| Software 2.57 - January 2024 | N610 | N670 | N870 | Integrator |
|---|
New hardware support | Yes | Yes | Yes | - |
Automatic online firmware update via web-interface with link to release notes | Yes | Yes | Yes | - |
R700H protect support | Yes | Yes | Yes | Yes |
Length of internal numbers when using access and area codes | Yes | Yes | Yes | Yes |
DNS SRV: Failover/Fallback improvements | Yes | Yes | Yes | Yes |
Upgrade open SSL from version 1.1.1 to version 3.0 | Yes | Yes | Yes | Yes |
EPOS/Sennheiser GAP Headsets do not honor Basic-Service=Basic-Speech, after register this DECT headset direct to our DECT system, there is no audio | Yes | Yes | Yes | Yes |
N670 mini multicell needs to be upgraded with upgrade to N870 feature level license. Show the MAC-ID in the N670 mini multicell DECT base web-interface (https://<IP_Addr>/dlsd-stats). This simplifies the ordering of the licenses for all N670 devices as the MAC-ID is required to order the license. | - | Yes | - | - |
Syslog and user change time stamp should contain year by default | Yes | Yes | Yes | Yes |
N610: XML file for repeater, only MAC in lower case is accepted. Upper case and lower case should be supported | Yes | - | - | - |
After DECT system software update, refresh the Handset DECT (PNCAP) functionality | Yes | Yes | Yes | Yes |
GAP handset support via setting is not valid anymore, GAP handsets are supported by default | Yes | Yes | Yes | Yes |
Multiple PBX Redundancy by Moved permanently or temporarily | Yes | Yes | Yes | Yes |
Central Phonebook |
|
|
|
|
| Enabled again for Virtual Integrator (Not possible using Embedded Integrator) | - | - | - | Yes |
| Network access closed when not used (Security improvement) | Yes | Yes | Yes | Yes |
| Refresh now button in web interface | Yes | Yes | Yes | Yes |
| Add "search anywhere in name" option in web interface | Yes | Yes | Yes | Yes |
Web interface |
|
|
|
|
| Show reason why Upload license file failed | Yes | Yes | Yes | Yes |
| Base station export drop-down box supports: XML/CSV | Yes | Yes | Yes | Yes |
| Embedded Integrator reset option via web-interface offers more roles | - | - | - | Yes |
| CNIPoverLookup enable/disable | Yes | Yes | Yes | Yes |
For improved interoperability and robustness, ptp operation of V2.57.0 is back to two-step clock synchronisation. | - | Yes | Yes | Yes |
Webgui is unusable after "wrong password" in SIP account | Yes | Yes | Yes | Yes |
Autolookup in Broadsoft XSI phonebooks: Number is not replaced with the contact name | Yes | Yes | Yes | Yes |
Broadsoft N-Way conference: Adding conference participants is not possible when access code is used | Yes | Yes | Yes | Yes |
SIP registration improvements | Yes | Yes | Yes | Yes |
Access code "0" / "Always", redial is not working correctly | Yes | Yes | Yes | Yes |
After a time all handsets reply with "Busy Here" to incoming calls | Yes | Yes | Yes | Yes |
CLIP/COLP option does not show numbers starting with + | Yes | Yes | Yes | Yes |
| Software 2.54 - July 2023 | N610 | N670 | N870 | Integrator |
|---|
Download of DECT measurements files via the web-interface | Yes | Yes | Yes | Yes |
First implementation of Virtual Integrator Hyper-V support, contact your Gigaset technical sales if you want to use this | - | Yes | Yes | Yes |
LDAP Filter improvement | Yes | Yes | Yes | Yes |
Default production certificate expired | Yes | Yes | Yes | Yes |
N-Way conference is possible when Internal telephony is enabled | Yes | Yes | - | - |
Internal telephony: Broadsoft XSI Authentication using SIP credentials from SIP account | Yes | Yes | - | - |
DNS-SRV failover/fallback improvements | Yes | Yes | Yes | Yes |
CNIPoverLookup improvement, do lookup if CNIP contains number only | Yes | Yes | Yes | Yes |
If handset import has an error, it should be more descriptive | Yes | Yes | Yes | Yes |
Polish language update | Yes | Yes | Yes | Yes |
Sporadic calls are not delivered to the handset | Yes | Yes | Yes | Yes |
Inband DTMF over G722 doesn't work | Yes | Yes | Yes | Yes |
Process terminated when dialed the code for call forwarding | Yes | Yes | Yes | Yes |
No ringback tone in case of internal call originated from CTI | Yes | Yes | Yes | Yes |
| Software 2.53 - May 2023 | N610 | N670 | N870 | Integrator |
|---|
DECT security step B | Yes | Yes | Yes | Yes |
New DECT measurement procedure | Yes | Yes | Yes | Yes |
R700H SPK PRO handset (Calibrated R700H PRO) is supported | Yes | Yes | Yes | Yes |
DNS-SRV failover/fallback improvements | Yes | Yes | Yes | Yes |
Internal Telephony: Broadsoft phonebook, XSI Authentication using SIP credentials | Yes | Yes | - | - |
Provisioning | Yes | Yes | Yes | Yes |
| Web-interface: Show warning when errors in provisioning file | Yes | Yes | Yes | Yes |
| Http digest username and password via redirect server | Yes | Yes | Yes | Yes |
| Internal Telephony: Not give an error message if the handset is not available | Yes | Yes | - | - |
AML / MQTT | - | Yes | Yes | Yes |
| Make error handling more descriptive for AML Message
| - | Yes | Yes | Yes |
| Notify server that the handset is in/out of charger | - | Yes | Yes | Yes |
Web-interface
| Yes | Yes | Yes | Yes |
| Support for Polish language
| Yes | Yes | Yes | Yes |
| UDP NAT refresh timer | Yes | Yes | Yes | Yes |
New access code option "Manual dialing" | Yes | Yes | Yes | Yes |
Microsoft Teams: Start provisioning via web-interface | Yes | Yes | Yes | Yes |
Configure Registration Window DM specific
| - | - | Yes | Yes |
Diversion header in SIP INVITE is supported
| Yes | Yes | Yes | Yes |
Security: Mediasec improvement
| Yes | Yes | Yes | Yes |
Openstage M3 handset can not start an Alarm call
| Yes | Yes | Yes | Yes |
Incorrect license status for N670 license upload on licensing page
| - | Yes | - | - |
wrong license after save/restore config on N670 with upgrade
| - | Yes | - | - |
Provisioning: set_hs_aml not working with capital letters
| Yes | Yes | Yes | Yes |
DM Call limit problem
| - | - | Yes | Yes |
If display name of the caller contains the char “ and <, they are not displayed on receiver device
| Yes | Yes | Yes | Yes |
Autolookup in XSI phonebooks is not working properly when caller ID source is PAI
| Yes | Yes | Yes | Yes |
Failover period active after upload license for VI
| - | - | - | Yes |
Continued audio after hang-up for some time
| Yes | Yes | Yes | Yes |
SRTP Audio stops after 15min
| Yes | Yes | Yes | Yes |
| Software 2.52 - February 2023 | N610 | N670 | N870 | Integrator |
|---|
| Internal telephony role | Yes | Yes | - | - |
| Auto-provisioning SIP accounts and handset assignment | Yes | Yes | - | - |
| Hide SIP account admin page | Yes | Yes | - | - |
Access code: Internal/emergency numbers handling | Yes | Yes | Yes | Yes |
Delay firmware upgrade/downgrade if there is an active call | Yes | Yes | Yes | Yes |
DECT manager redundancy | - | - | Yes | Yes |
Microsoft Teams supported | Yes | Yes | Yes | Yes |
Broadsoft N-way conference | Yes | Yes | Yes | Yes |
Licence can be updated via online process | - | Yes | Yes | Yes |
| Nx70 online access to license server | - | Yes | Yes | Yes |
| Automatic licence update every 24 hours | - | Yes | Yes | Yes |
| Show date/time of last connection to license server | - | Yes | Yes | Yes |
| Licence Refresh button | - | Yes | Yes | Yes |
| Licence: | - | - | Yes | Yes |
| 'Please activate licence' after restore settings with an active licence to another VI | - | - | Yes | Yes |
| Failover Period Active is shown in web-interface | - | - | Yes | Yes |
| Alarming, Messaging and Location | - | Yes | Yes | Yes |
| Messaging and/or Location license can be activated/deactivated via the web-interface | - | Yes | Yes | Yes |
| Messaging and/or location license is visual in the handset overview via an icon | - | Yes | Yes | Yes |
| BLE via MQTT within 20 seconds sends cached values | - | Yes | Yes | Yes |
| timeout in aml message status fullview_by_user_interact | - | Yes | Yes | Yes |
| Notification about DECT base and DECT manager status | - | Yes | Yes | Yes |
| Extend CLIP/COLP possibilities with PAI(tel) | Yes | Yes | Yes | Yes |
| FROM | Yes | Yes | Yes | Yes |
| PPI + FROM | Yes | Yes | Yes | Yes |
| PAI(sip )+ PPI + FROM | Yes | Yes | Yes | Yes |
| PAI(tel) + PPI + FROM | Yes | Yes | Yes | Yes |
| PAI(tel) + FROM + PAI(sip) | Yes | Yes | Yes | Yes |
Syslog: TLS protocol can be configured via web-interface and not only via auto-provisioning | Yes | Yes | Yes | Yes |
DECT registration window | Yes | Yes | Yes | Yes |
| Close the DECT registration window on all DMs, if not handset open "to-register".
Application Note: If you want to keep registration window open for bulk re-registration, create an additional dummy handset open in "to-register", that will not re-register! | Yes | Yes | Yes | Yes |
| Support: log information about changes made by de user/provisioning in the one-button diagnostic file | Yes | Yes | Yes | Yes |
Consultation-Softkey (to put call on hold and start consultation call) should not disappear in passive hold | Yes | Yes | Yes | Yes |
Central Phonebook | Yes | Yes | Yes | Yes |
| Do not show empty entries | Yes | Yes | Yes | Yes |
| Download via https | Yes | Yes | Yes | Yes |
Security: Disable unsecure TLS1.1 | Yes | Yes | Yes | Yes |
CNIP with special characters is displayed incorrectly on consultation call display | Yes | Yes | Yes | Yes |
Provisioning: | Yes | Yes | Yes | Yes |
| Templates with more handsets then supported should not give error | Yes | Yes | Yes | Yes |
| Encrypted provisioning file support | Yes | Yes | Yes | Yes |
Web-interface: Status of last Automatic backup | Yes | Yes | Yes | Yes |
CCBS - Ringback via 486 Busy like in N720 | Yes | Yes | Yes | Yes |
SIP re-registration expected at ..% of expire timer | Yes | Yes | Yes | Yes |
Reboot via SIP NOTIFY Event: check-sync;reboot=true | Yes | Yes | Yes | Yes |
Option for priority of SIP name over net/central-dir-autolookup | Yes | Yes | Yes | Yes |
***922 test tone gone after handover | - | Yes | Yes | Yes |
CCBS and CCNR should by config-option be made available for SIP servers indicating ccbs/ccnr support by different measures | Yes | Yes | Yes | Yes |
TTL time can be adjusted to 128 | Yes | Yes | Yes | Yes |
Send DTMF tone during call waiting signaling | Yes | Yes | Yes | Yes |
Name in XSI phonebook is not displayed properly in incoming calls | Yes | Yes | Yes | Yes |
SIP account does not register after employee change | Yes | Yes | Yes | Yes |
N870 behind IBERNEX "nurse call" system - CLIP/CNIP is not displayed in incoming calls, "External" instead | - | Yes | Yes | Yes |
DNS SRV/A queries - TTL not applied | Yes | Yes | Yes | Yes |
Busy display - removing useless softkey "Options" as it does nothing at "Busy" display | Yes | Yes | Yes | Yes |
If Registrar/Proxy is given by FQDN, Failover-Server function does not work | Yes | Yes | Yes | Yes |
Sporadic no audio when using TLS and SRTP in a multicell environment | - | Yes | Yes | Yes |
LAN synchronisation: ptp reload and so asynchrony triggered by too sensitive check for DHCP changes | - | Yes | Yes | Yes |
N670 auto-answer call info after=0, also if Call Manager set to NO! | Yes | Yes | Yes | Yes |
RFC2833 DTMF doesn't work | Yes | Yes | Yes | Yes |
After some weeks stop sip registration | Yes | Yes | Yes | Yes |
Enabling/Disabling VLAN via provisioning makes the LAN interface go down | Yes | Yes | Yes | Yes |
RPID info in UPDATE is not displayed on handset after attended transfer | Yes | Yes | Yes | Yes |
INVITE with replaces header is not answered with 200OK | Yes | Yes | Yes | Yes |
| LDAP | Yes | Yes | Yes | Yes |
| LDAP client is not able to properly close the session when there are some errors during parsing of the LDAP filters configured for LDAP requests | Yes | Yes | Yes | Yes |
| Validate syntax for filters | Yes | Yes | Yes | Yes |
| Software 2.49.1 - September 2022 | N610 | N670 | N870 |
|
|---|
Access code dialing not for short (internal) numbers with exception of emergency numbers | - | Yes | Yes |
|
| Software 2.48 - June 2022 | N610 | N670 | N870 |
|
|---|
| Show in syslog when license is applied for wrong master DM | - | - | Yes |
|
| Device doesn't send REGISTER after provisioning when TCP is used | - | Yes | Yes |
|
| Unexpected change of license status from "License activated" to "Failover period active" after changing SIP provider settings and reboot. | - | Yes | Yes |
|
| Software 2.47 - June 2022 | N610 | N670 | N870 |
|
|---|
Add new MQTT connection Method | - | Yes | Yes |
|
Introduce sip.instance and reg-id according to rfc5626 | - | Yes | Yes |
|
Broadsoft XSI phonebooks, lookup in multiple XSI phonebooks: | - | Yes | Yes |
|
Update PJSIP library to version 2.11.1 | - | Yes | Yes |
|
| Messaging: | - | Yes | Yes |
|
| Improve performance of deleting messages in msg-service via delMsg procedure | - | Yes | Yes |
|
| Blue color AML texts and icons support | - | Yes | Yes |
|
| TLS 1.3 support | - | Yes | Yes |
|
| Warn about SIP messages too long for UDP transport | - | Yes | Yes |
|
| Show longer internal names on R700H / S700H / SL800H handsets | - | Yes | Yes |
|
Create web page for automatic backup | - | Yes | Yes |
|
Fallback from failover honoring a penalty time | - | Yes | Yes |
|
AML inventory/status report: base stations and DECT managers - connectivity and synchronization | - | Yes | Yes |
|
Show in the UI and Logs reason for not registering SIP | - | Yes | Yes |
|
Loses the SIP registration until the next restart | - | Yes | Yes |
|
Some mobile devices are no longer registered after a network down | - | Yes | Yes |
|
Registration after receive 503 with Retry-After | - | Yes | Yes |
|
N870 with V2.44 - VI licenses no longer work | - | Yes | Yes |
|
Minor memory leak when performing LDAP tests | - | Yes | Yes |
|
Failed registration retry timer not respected due to SIP registration monitoring | - | Yes | Yes |
|
MWI after "Call completed elsewhere" | - | Yes | Yes |
|
Phonebook Italian translation for "Refine" | - | Yes | Yes |
|
DTMF not work if 103 telephone-event/48000 is send in "INVITE" | - | Yes | Yes |
|
Sporadically restart | - | Yes | Yes |
|
Trying and Ringing send with codec mismatch | - | Yes | Yes |
|
License: | - | Yes | Yes |
|
| Missing MAC address of Master DM in MAC-ID and not possible to upload license file for Master DM | - | - | Yes |
|
| Invalid license status: Activation Period -1 d for some variants | - | - | Yes |
|
| Messaging: | - | Yes | Yes |
|
| Second paragraph in message is not displayed in detailed view | - | Yes | Yes |
|
| Title not displaying in detailed view | - | Yes | Yes |
|
| LDAP | - | Yes | Yes |
|
| Incorrect search request and sporadic giga-ip-bs crash during specific LDAP search | - | Yes | Yes |
|
| - Heal TLS LDAP session pending too long
| - | Yes | Yes |
|
Software 2.44 - Jan 2022
| N610 | N670 | N870 |
|
|---|
Automatic back-up to an SFTP server | - | Yes | Yes |
|
AML
| - | Yes | Yes |
|
| Per default one Messaging and Location License is enabled | - | Yes | Yes |
|
| Show AML licenses on License page | - | Yes | Yes |
|
| Message Melody Names are still missing translation in handset UI | - | Yes | Yes |
|
| Application server, secure connection using certificates | - | Yes | Yes |
|
| User settings like silencing can be overruled via MQTT | - | Yes | Yes |
|
| Vibration can be activated via MQTT | - | Yes | Yes |
|
| Message ringtone volume can be set via MQTT | - | Yes | Yes |
|
| Text with line break can be send | - | Yes | Yes |
|
| Option to allow user to delete the message can be set to yes or no via MQTT | - | Yes | Yes |
|
| Reply options changed from 3 to 10 | - | Yes | Yes |
|
Auto-provisioning: Set TTL value for IPv4 for INT-DM roles | - | Yes | Yes |
|
Auto-provisioning: NTP server via DHCP option 42 | - | Yes | Yes |
|
Auto-provisioning: DNS option 6 DNS server | - | Yes | Yes |
|
Central phonebook: | - | Yes | Yes |
|
| Search anywhere in name can be configured | - | Yes | Yes |
|
| Sort on first name / last name or Last name / first name | - | Yes | Yes |
|
The handset can not connect for a short period, show "No base" | - | Yes | Yes |
|
Web UI: DECT Settings - add DECT radio band selection for SEA/Taiwan | - | Yes | Yes |
|
SUOTA pull | - | Yes | Yes |
|
Download of FW file is not possible if the MAC is checked | - | Yes | Yes |
|
Disable central phonebook for large installations | - | - | Yes |
|
License: Web-interface: Remove "Create Request File" | - | Yes | Yes |
|
Fix registration problems with >1 Contact headers | - | Yes | Yes |
|
Add support for SIP-OPTIONS sent during INVITE dialog | - | Yes | Yes |
|
ptime value is not sent in outgoing calls | - | Yes | Yes |
|
System restarts, sporadic giga-ip-bs termination | - | Yes | Yes |
|
DECT system loses registration on PBX after approx. 3 months | - | Yes | Yes |
|
Sporadically restart | - | Yes | Yes |
|
LDAP improvements | - | Yes | Yes |
|
In dialog Re-Invite is not answered with all codecs in SDP | - | Yes | Yes |
|
Calls can't be set up from time to time (603 decline) | - | Yes | Yes |
|
uaCSTA Registration refresh timer | - | Yes | Yes |
|
uaCSTA Clear Connection in calling state | - | Yes | Yes |
|
uaCSTA incoming call ringing end call by caller | - | Yes | Yes |
|
XML phonebook: HS displays "empty line" | - | Yes | Yes |
|
Software 2.44 - Jan 2022 | N610 | N670 | N870 |
|
|---|
Alarming, messaging and location | - | Yes | Yes |
|
SIP messaging | - | Yes | Yes |
|
Messaging and location license | - | Yes | Yes |
|
NAT refresh timer | - | Yes | Yes |
|
TLS 1.3 first implementation for provisioning / LDAPS / MQTT | - | Yes | Yes |
|
Central phonebook search anywhere in name via provisioning "CentralBook.0.SearchAnywhereInName" | - | Yes | Yes |
|
Russian/Dutch translations | - | Yes | Yes |
|
Provide feedback when DM statistics are not available | - | Yes | Yes |
|
DST Root CA X3 certificate expires in less than 180 days (2021-09-30) | - | Yes | Yes |
|
Improve syslog to show why license was rejected | - | Yes | Yes |
|
Re-invite is not answered with all codecs in SDP | - | Yes | Yes |
|
Statistics not retrieved - Operation Failed and other WEB UI pages not shown | - | Yes | Yes |
|
Provisioning using "@" sign blocks adding DECT base "System limit has been exceeded." | - | Yes | Yes |
|
Splash ring: wrong soft keys are shown after answer the call | - | Yes | Yes |
|
Web-interface, system is shown as "small" instead of "medium" | - | Yes | Yes |
|
Incorrect display in the statistics"Operation failed” | - | Yes | Yes |
|
Statistics Reset all doesn't include LAN counters | - | Yes | Yes |
|
After update with expansion to 20 providers, 1 missing 19 shown. | - | Yes | Yes |
|
System reboots when trying to access LDAP contacts | - | Yes | Yes |
|
Crash after incoming calls from certain mobile phone provider | - | Yes | Yes |
|
Dropped calls giga-ip-bs terminated | - | Yes | Yes |
|
Base Restarts when wants to hear VoiceMail | - | Yes | Yes |
|
Performance problem with BS synchronisation page | - | Yes | Yes |
|
DECT not responsive after Network voice mail pressed simultaneously from 2 DECT devices | - | Yes | Yes |
|
| Software 2.39 - March 2021 | N610 | N670 | N870 |
|
|---|
Implementation of 'mediasec' support | - | Yes | Yes |
|
N670 Mini-multicell solution | - | Yes | - |
|
N670 with N670 UPGRADE TO N870 FEATURE LEVEL license can be used as DECT Base in N870 multicell system | - | Yes | - |
|
Provisioning of network settings | - | Yes | Yes |
|
gigaset-config.com is supported | - | Yes | Yes |
|
uaCSTA improvements | - | Yes | Yes |
|
Tone scheme "Greece" can be selected | - | Yes | Yes |
|
Delete handset does not work when capital letters are used for IPUI | - | Yes | Yes |
|
Use xHTML phonebook for call transfer > works not with the prov xHTML phonebook Key | - | Yes | Yes |
|
Blind-transfer can be disabled | - | Yes | Yes |
|
Change system from Small to Medium then error message is shown | - | Yes | Yes |
|
Firmware update via 2-way SSL fails | - | Yes | Yes |
|
Wrong MWI indication caused by platform NOTIFY broadcasts | - | Yes | Yes |
|
CNIP with special characters doesn't display correctly | - | Yes | Yes |
|
Outgoing call with letters in SIP from user part is not stored | - | Yes | Yes |
|
CNIP is not displayed on HS if it contains "@" character | - | Yes | Yes |
|
XSI phonebook list 211 "Too many entries found" but works | - | Yes | Yes |
|
Empty header for entry view in Personal and Group Common directories | - | Yes | Yes |
|
Incoming call with letters in SIP From user part is not stored with URI to call back | - | Yes | Yes |
|
When SRTP used, after 90 days no audio | - | Yes | Yes |
|
XSI phonebook, can not answer call due to bad/slow network connection | - | Yes | Yes |
|
Software 2.36 - September 2020 | N610 | N670 | N870 |
|
|---|
SIP account for provisioning | - | - | Yes |
|
LAN statistics DECT base via new DECT base web-interface | - | Yes | Yes |
|
Increase number of SIP providers from 10 to 20 | - | Yes | Yes |
|
Auto-provisioning: Improve delete handsets | - | Yes | Yes |
|
Update PJSIP library to version 2.10 | - | Yes | Yes |
|
CLI-config: system applications / services should consume DHCP options only if requested | - | Yes | Yes |
|
XML number filter visible in web-interface by default | - | Yes | Yes |
|
uaCSTA normalClearing not send when other side disconnects call | - | Yes | Yes |
|
Enable hiding passwords for SIP all Accounts | - | Yes | Yes |
|
Feature key synchronization can also be used by non Broadsoft platforms | - | Yes | Yes |
|
No name displayed when number is anonymous | - | Yes | Yes |
|
Turn LED signalling on/off via the web-interface | - | Yes | Yes |
|
Add popup to reboot system after importing DECT handsets | - | Yes | Yes |
|
Make syslog easily configurable | - | Yes | Yes |
|
Web UI - Licensing - Activation period status message | - | Yes | Yes |
|
Dm ID can be set via provisioning | - | - | Yes |
|
PJSIP stops sending REGISTER by TCP after reboot of PBX | - | Yes | Yes |
|
sip-control terminated. | - | Yes | Yes |
|
Switch from UDP to TCP and back then no SIP registration anymore | - | Yes | Yes |
|
Network name replacement does not work in Jumbo mode | - | Yes | Yes |
|
Lack of syslog info about mobile device import fail | - | Yes | Yes |
|
LDAP stops working | - | Yes | Yes |
|
Reset of VI with keep IP option resets to dynamic IP instead | - | - | Yes |
|
No information about anonymous call is displayed in jumbo mode | - | Yes | Yes |
|
SIP re-register stops when platform is unavailable "Not enough memory" message is seen | - | Yes | Yes |
|
Graphical tool does not show signal info to base station with equal or higher sync level | - | Yes | Yes |
|
Capacity of DM's is not summarized correctly by web-ui | - | Yes | Yes |
|
No LAN synchronization possible for medium deployment if DM is LAN Master | - | - | Yes |
|
[Online directories][XML] Escaped characters and numeric character entities are not recognized | - | Yes | Yes |
|
Software 2.33 - June 2020 | N610 | N670 | N870 |
|
|---|
Install DECT base in different subnet | - | Yes | Yes |
|
Virtual Integrator: Licensing of up to 100 N870 and 300 Single Cell DM's (N670) is possible | - | - | Yes |
|
Embedded Integrator: Licensing of up to 4 N870 and 20 Single Cell DM's (N670) is possible | - | - | Yes |
|
N670 upgrade to N670 multicell | - | Yes | - |
|
N870 up to 10 base-stations (Small), number of maximum parallel calls increased from 10 → 20 | - | - | Yes |
|
Web-interface HTTP access is disabled, redirected to HTTPS only | - | Yes | Yes |
|
Role change via hardware key is made more simple including LED signaling | - | Yes | Yes |
|
Show in web-interface if DECT base firmware update is running | - | Yes | Yes |
|
One button Diagnostics download | - | Yes | Yes |
|
WebUI becomes inaccessible (No connections..., please wait...) when enabling TLS | - | Yes | Yes |
|
T1 timer minimum value increased to 100 ms | - | Yes | Yes |
|
Provisioning | - | Yes | Yes |
|
| Sending Empty or wrong value DECT Radio band caused DECT radio to be disabled | - | Yes | Yes |
|
| Improve auto provisioning speed from 63 seconds to 13 seconds | - | Yes | Yes |
|
| Provision certificates and device settings in one provisioning job | - | Yes | Yes |
|
| Hide web-pages | - | Yes | Yes |
|
| Time span when the device checks for provisioning updates needs to be configurable | - | Yes | Yes |
|
Client certificate not added in case of 2-way SSL. | - | Yes | Yes |
|
XML online directory - Results not visualized in case of more than 99 entries | - | Yes | Yes |
|
N670/N870 Central Phone-book: Not able to search for special characters | - | Yes | Yes |
|
xHTML | - | Yes | Yes |
|
| use xHTML phone-book for call transfer | - | Yes | Yes |
|
| Password is limited to 9 characters | - | Yes | Yes |
|
| Device does not send DHCP release when rebooting, can be enabled by CLI or variant. | - | Yes | Yes |
|
| Central phone-book | - | Yes | Yes |
|
| Delete via web-interface is now possible. | - | Yes | Yes |
|
| When first line is empty, phone-book does not work | - | Yes | Yes |
|
One user-agent behind integrator | - | - | Yes |
|
| Web-interface: | - | Yes | Yes |
|
| Removed not functional phone systems | - | Yes | Yes |
|
| Hide web-pages | - | Yes | Yes |
|
| SIP control terminated fixed | - | Yes | Yes |
|
| NOTIFY with a tag in header "To" causes "500 Unhandled by dialog usages" | - | Yes | Yes |
|
| When '#' is added to numbers it is displayed on HS as '%23' | - | Yes | Yes |
|
| Software 2.29.1 - March 2020 | N610 | N670 | N870 |
|
|---|
DECT base level 1 redundancy | - | Yes | Yes |
|
LAN sync statistics in base station statistics | - | Yes | Yes |
|
RTCP support | - | Yes | Yes |
|
SIP compact headers are supported | - | Yes | Yes |
|
For service fade-out option, Block new calls | - | Yes | Yes |
|
Web-interface is blocked for 10 minutes after 3 wrong login attempts | - | Yes | Yes |
|
Supported web-interface languages: English / German / French / Spanish / Dutch / Italian / Portuguese / Turkish / Russian / Czech / Polish / Slovenian / Greek | - | Yes | Yes |
|
N870 all-in-one with no extra DECT base can now handle 8 parallel calls instead of 5 | - | Yes | Yes |
|
Improve SIP via TCP socket handling | - | Yes | Yes |
|
RTP-port range per DECT base changed from 400 → 240 | - | Yes | Yes |
|
RTP-port range for 60 DECT base stations changed from 24000 → 14400 | - | Yes | Yes |
|
Auto-provisioning: | - | Yes | Yes |
|
| Add provisioning parameter: Maximum search results central phone-book | - | Yes | Yes |
|
| No Error is displayed in web-interface when firmware update is empty or not needed | - | Yes | Yes |
|
| Outbound proxy with leading space not resolved by DNS | - | Yes | Yes |
|
| Improved performance adding handsets and SIP accounts | - | Yes | Yes |
|
| Zombie handsets: show now more customer friendly message: "Please register!" | - | Yes | Yes |
|
| No missed calls when call waiting is disabled | - | Yes | Yes |
|
| xHTML white-space trailing before "&" sign | - | Yes | Yes |
|
| Turkish characters not displayed correct at some DECT handsets | - | Yes | Yes |
|
| Cyrillic characters not displayed during Pickup notification | - | Yes | Yes |
|
| Access Code not applied in case of option - From network directory | - | Yes | Yes |
|
| Room monitor call not possible | - | Yes | Yes |
|
| Translation improvements | - | Yes | Yes |
|
E.164 support | - | Yes | Yes |
|
| Failed registration retry timer is not respected when SIP proxy is set | - | Yes | Yes |
|
| Distinctive ring: | - | Yes | Yes |
|
| Empty header is supported | - | Yes | Yes |
|
| Re-register handsets to display all ringtones | - | Yes | Yes |
|
| Delete/change important settings, protected via username and password. | - | Yes | Yes |
|
| Delete one or more DECT handsets. | - | Yes | Yes |
|
| Admin password | - | Yes | Yes |
|
| User password | - | Yes | Yes |
|
| CLI password | - | Yes | Yes |
|
| Web security certificate | - | Yes | Yes |
|
| Reset device/role change | - | Yes | Yes |
|
| Software 2.26.0 - December 2019 | N610 | N670 | N870 |
|
|---|
| Supported Languages: German / English / Spanish / French / Italian / Russian / Turkish / Netherlands / Portuguese | - | Yes | Yes |
|
Save of Central phone-book is now possible | - | Yes | Yes |
|
Distinctive ringing for internal, external, door station, group, emergency or user defined call types | - | Yes | Yes |
|
Add capacity information to http (GET) user-agent header | - | Yes | Yes |
|
Large and XXL systems are now released | - | - | Yes |
|
N870 in Integrator mode only: | - | - | Yes |
|
| Up to 4 DECT Managers (With license) | - | - | Yes |
|
| Up to 800 DECT handsets | - | - | Yes |
|
N870 Virtual Integrator is released | - | - | Yes |
|
| Up to 100 DECT Managers (With license) | - | - | Yes |
|
| Up to 20000 DECT handsets | - | - | Yes |
|
DECT GAP handsets protection can be disabled | - | Yes | Yes |
|
Improved DECT handset registration, up to 10 registrations in parallel can be done. | - | Yes | Yes |
|
NAPTR | - | Yes | Yes |
|
CSTA | - | Yes | Yes |
|
| CSTA session already active | - | Yes | Yes |
|
| CSTA transport protocol can be changed via the web-interface | - | Yes | Yes |
|
| SnapshotDeviceResponse answer is wrong | - | Yes | Yes |
|
| Switch the transport protocol without an reboot | - | Yes | Yes |
|
| Device reboots when using uaCSTA and receiving 2e incoming call | - | Yes | Yes |
|
CNIP not updated on Transferee after transfer | - | Yes | Yes |
|
Central phone-book | - | Yes | Yes |
|
| Can be downloaded via the web-interface | - | Yes | Yes |
|
| INT key can be assigned to Central phone-book | - | Yes | Yes |
|
| After provisioning phone-book is automatically downloaded | - | Yes | Yes |
|
Web-interface: | - | Yes | Yes |
|
| Show Licensing page when used as Integrator only | - | Yes | Yes |
|
| Configure SIP registration behavior if mobile device is not connected/reachable | - | Yes | Yes |
|
| Caller-Id not updated after call transfer at OpenScape Business | - | Yes | Yes |
|
| Fix for CNIP with Cyrillic characters not displayed on DECT phone | - | Yes | Yes |
|
| HTTPS for Rap - fixes for nested absolute links | - | Yes | Yes |
|
| Get handset information via HTTP(s) get | - | Yes | Yes |
|
| Fail-over to secondary SBC (sip proxy) | - | Yes | Yes |
|
| Register request with Authorization Digest: QOP = "auth-int" or "auth-init" | - | Yes | Yes |
|
| Display handset during call transfer is very slow | - | Yes | Yes |
|
| xHTML | - | Yes | Yes |
|
| Incoming invite with auto-answer is not possible | - | Yes | Yes |
|
| Service doesn't work when credentials are empty | - | Yes | Yes |
|
| "&" Sign gives error message | - | Yes | Yes |
|
| Syslog | - | Yes | Yes |
|
| Add information if setting is changed | - | Yes | Yes |
|
| Add LDAP information | - | Yes | Yes |
|
| No CLIP update | - | Yes | Yes |
|
| LDAP detail view doesn't work on some entries | - | Yes | Yes |
|
| Auto-provisioning | - | Yes | Yes |
|
| Parameter "Provisioning.global.Period" should work without restart | - | Yes | Yes |
|
| Default ringtone can be changed via provisioning | - | Yes | Yes |
|
| Provisioning started via web-interface showed failed message but worked fine | - | Yes | Yes |
|
| Maximum length of REFER-TO header increased | - | Yes | Yes |
|
| Access code From incoming calls and from network together with Area code is not working | - | Yes | Yes |
|
| DTMF: No CRLF after the "Duration" line | - | Yes | Yes |
|
| Software 2.23.0 - September 2019 | N610 | N670 | N870 |
|
|---|
| 3 party conference | - | Yes | Yes |
|
DE-REGISTER SIP account when handset is switched of or out of range | - | Yes | Yes |
|
| DHCP option 66 (HTTP(s) provisioning URL) | - | Yes | Yes |
|
| DECT sync levels increased from 10 to 15 | - | Yes | Yes |
|
| DHCP option 51 and 125 | - | Yes | Yes |
|
| Auto-provisioning: | - | Yes | Yes |
|
| Parameters without IPUI, like: <param name="SipAccount..AuthName" value="" /> are ignored to speed-up provisioning when sending full provisioning templates with many empty handsets | - | Yes | Yes |
|
| UpdateDectManager procedure can cause that DECT manager can't connect to Integrator | - | - | Yes |
|
| Error message should not be shown due to errors in wrong configured parameters as other parameters are accepted | - | Yes | Yes |
|
| Direct link to provisioning file with extension.cfg via redirect is now possible | - | Yes | Yes |
|
| User-agent in HTTP get contains information about Maximum number of handsets allowed | - | Yes | Yes |
|
| Status-page: Direct links to the configuration pages | - | Yes | Yes |
|
| Mobile devices - administration: New icon in DECT column when handset is switched off or out of range (signalling out of range can take up to 3 hours) | - | Yes | Yes |
|
| After changing number of active base stations, Web-interface returns to base station synchronisation list | - | Yes | Yes |
|
| TCP/TLS port SIP destination port 10060 not working. | - | Yes | Yes |
|
| Broadsoft | - | Yes | Yes |
|
| Improvement for DND, Call Forward Always, Busy and no Answer | - | Yes | Yes |
|
| Call Forward is splitted from one handset menu to 3 menu items | - | Yes | Yes |
|
| XSI phonebook, reverse lookup is now done based on the exact number | - | Yes | Yes |
|
| Central phonebook | - | Yes | Yes |
|
| Special characters not displayed correct | - | Yes | Yes |
|
| URL length increased to 254 characters | - | Yes | Yes |
|
3CX
| - | Yes | Yes |
|
| Call transfer improvement. | - | Yes | Yes |
|
| CNIP update improvement. | - | Yes | Yes |
|
| LDAP(S) improvements | - | Yes | Yes |
|
| Improved overview if the DECT registration window is open or close | - | Yes | Yes |
|
| DNS failover improvement | - | Yes | Yes |
|
| Add factory reset option / role change when device is Manager + Base | - | Yes | Yes |
|
| N670 can be added to the Virtual Integrator | - | Yes | - |
|
| LDAP/XML/XSI phonebooks can be used during call transfer | - | Yes | Yes |
|
| Anonymous calls are not saved in Call Lists | - | Yes | Yes |
|
| NTP too low threshold for Root Dispersion. | - | Yes | Yes |
|
| xHTML "&" sign should not generate error | - | Yes | Yes |
|
| Reboot when ringing HS is switches off | - | Yes | Yes |
|
| uaCSTA, SnapshotDeviceResponse answer is wrong | - | Yes | Yes |
|
| Switching from SRTP to RTP during 1 call | - | Yes | Yes |
|
| MWI counter update improvement | - | Yes | Yes |
|
| Crashed, when sip-user-id is longer that 19 characters (or uninitialized) | - | Yes | Yes |
|
| First improvements to support NAPTR is implemented. (Official supported in Next release) | - | Yes | Yes |
|
| Software 2.20.0 - July 2019 | N610 | N670 | N870 |
|
|---|
| SIP options in SIP register header | - | Yes | Yes |
|
| Ghost handsets show display message to "Reset or to Register" | - | Yes | Yes |
|
| Updated German translations | - | Yes | Yes |
|
| Improvements for large systems | - | - | Yes |
|
| Improvements for LAN sync | - | Yes | Yes |
|
| Software 2.17 - June 2019 | N610 | N670 | N870 |
|
|---|
| Use Phonebook key to assign to xHTML service | - | Yes | Yes |
|
Phonebook lookup caching time | - | Yes | Yes |
|
| Performance enhancements for high load and large systems | - | - | Yes |
|
| Firmware update via HTTPS using client certificates | - | Yes | Yes |
|
| LAN synchronisation to better deal with weak jitter | - | Yes | Yes |
|
| Security improvement | - | Yes | Yes |
|
| LDAP username does not allow "=" character | - | Yes | Yes |
|
| Call logs that have "-" character inside the CLIP | - | Yes | Yes |
|
| Software 2.16.2 - April 2019 | N610 | N670 | N870 |
|
|---|
| Status page, DECT base if it has "No sync" status will be visible. | - | Yes | Yes |
|
N870 new role, Integrator only. With one external DECT manager. | - | - | Yes |
|
| Firmware update using HTTPS client certificates. | - | Yes | Yes |
|
Auto provisioning using fixed numbering. | - | Yes | Yes |
|
Central phonebook | - | Yes | Yes |
|
Added new PKI Root Certificates | - | Yes | Yes |
|
Handset export/import improvement. | - | Yes | Yes |
|
SIP control termination fixed. | - | Yes | Yes |
|
Provisioning: IPUI using capital letters. | - | Yes | Yes |
|
Add time stamp to Incident.tar file. | - | Yes | Yes |
|
CNIP string should utilize all available space on the display. | - | Yes | Yes |
|
LDAP improvements. | - | Yes | Yes |
|
Provisioning Improvements | - | Yes | Yes |
|
Stability improvements | - | Yes | Yes |
|
User-agent for software download matches the SIP user-agent | - | Yes | Yes |
|